$148.99
In stock 30 Products
The Wavenet AC1602HFXMXX4-500 is a 16AWG 2-conductor stranded audio cable built for direct burial outdoor use. Featuring oxygen-free copper conductors (65x0.16mm), waterblock construction, and a UV-rated glossy PVC jacket, this 500ft spool delivers reliable signal transmission for landscape audio, commercial sound, and control systems. CL2/CL3 and CMR rated. Available in Black or White jacket.
$148.99
In stock 30 Products
The Wavenet AC1602OSPBK4-500 is a 16AWG/2C stranded riser CMR/CL3R direct burial audio cable built for permanent outdoor and in-wall installations. It features two oxygen-free bare copper conductors with 65-strand construction, a UV-rated FR-PVC jacket, and a paper tape plus rip cord inner layer for clean termination. ETL listed and rated for 300V with a temperature range of -20C to 70C. Ideal for direct burial, outdoor speaker runs, and in-wall installations requiring CMR/CL3R riser rating.
$142.99
In stock 30 Products
The Wavenet AC1602RXX4-500 is a 16 AWG 2-conductor oxygen-free copper (OFC) stranded audio cable in a 500ft REELEX II box. Rated CMR/CL3R riser for in-wall installations. ETL Listed, 300V, 75°C. Features 65-strand bare copper conductors per polarity, PVC insulation and jacket, and a nylon rip cord for easy stripping. Available in Black and White jackets.
$254.99
In stock 30 Products
The Wavenet SC2206SRWH1-S is a 1000ft pull pack of 22/6 stranded bare copper shielded security cable with a white FR-PVC jacket. Rated CMR (riser) and ETL listed, this 22AWG 6-conductor cable features a low-smoke aluminum mylar foil shield with 24 AWG tinned copper drain wire for EMI/RFI protection. Six color-coded conductors (Green, Red, Black, White, Brown, Blue) simplify multi-zone terminations. Rated 300V at -20°C to 75°C with integrated rip cord.
$98.99
In stock 30 Products
The Wavenet SC2204RWH-500-S is a 500ft coil of 22/4 stranded bare copper security cable with a white PVC jacket. Rated CMR (riser) and ETL listed, this 22AWG 4-conductor cable is built for professional alarm, access control, and low-voltage signal installations. Stranded conductors offer superior flexibility through conduit, while color-coded insulation (Red, Black, White, Green) simplifies field termination. Rated 300V at 75°C with an integrated rip cord for fast jacket stripping.
$159.99
In stock 30 Products
The Wavenet SC2204RXX1-S is a 22/4 stranded bare copper CMR riser-rated security cable in a 1000ft pull box. Featuring 4 individually color-coded conductors (Green, Red, Black, White) with PVC insulation and a durable PVC jacket, this 22AWG cable is rated for 300V RMS at 75°C. ETL listed with FT4 rating. Available in Grey and White jacket options.
$98.99
In stock 30 Products
Wavenet SC2202RWH-500-S 22/2 stranded bare copper riser security cable, 500ft white coil pack. 22AWG 2-conductor, 7-strand, PVC insulation (Red/Black), white PVC jacket, 3.10mm OD, 300V RMS, 75C, rip cord, ETL Listed CMR FT4 for alarm and access control.
$109.99
In stock 30 Products
Wavenet SC2202RXX1-S 22/2 stranded bare copper riser security cable, 22AWG 2-conductor unshielded CMR/FT4 rated. 300V 75°C PVC jacket with rip cord, 3.10mm OD. Ideal for burglar alarm, intercom, access control and Class 2 power-limited circuits. 1000ft REELEX II pull box in Grey and White.
$84.99
In stock 30 Products
The Wavenet SC2204RXX-500 is a 22/4 solid bare copper 4-conductor CMR riser-rated security cable supplied in a 500-foot coil pack. Engineered for alarm systems, access control, audio distribution, and low-voltage signaling, this cable features 22 AWG solid conductors with PVC insulation and a durable PVC jacket. Rated for 300V RMS operation at temperatures up to 75C, it delivers reliable signal integrity across commercial and residential installations. c(ETL) Listed and RoHS compliant, it meets TIA-569-C.2 standards for pathway and space infrastructure.
$164.99
In stock 30 Products
The Wavenet SC2204RXX1 is a 22/4 solid bare copper security cable with CMR Riser rating, ETL verified, and RoHS compliant. Built with 4 solid bare copper conductors (22 AWG) insulated with color-coded PVC and a durable PVC outer jacket. Rated 300V at 75°C with a 3.20 mm nominal OD. Ideal for security systems, intercoms, alarm signaling, and power-limited control circuits in commercial and residential installations. Available in 1000ft REELEX II pull boxes.
$52.99
In stock 30 Products
The Wavenet SC2202RWH-500 is a 22 AWG 2-conductor solid bare copper riser (CMR) security cable with a grey PVC jacket, rated for 300V RMS at 75°C. Each conductor is insulated with color-coded PVC (Red/Black) and features a 0.61 mm conductor diameter with a 0.96 mm insulation diameter. The overall cable diameter measures 2.80 mm with a 0.45 mm jacket thickness. ETL Listed with CMR/FT4 flame rating, this 500ft coil pack includes an integrated rip cord for easy jacket removal and is suitable for Class 2 power-limited circuit applications in security, access control, and CCTV installations.
$99.99
In stock 30 Products
The Wavenet SC2202R Series is a 22 AWG 2-conductor solid bare copper CMR riser security cable rated for 300V and 75°C. Featuring PVC insulation and jacket with a rip cord for easy stripping, this cable is c(ETL) US listed for Class 2 power-limited circuits. Available in Grey and White in a 1000 ft pull box, it is purpose-built for alarm systems, access control keypads, motion detectors, security contacts, and general-purpose low-voltage control circuits in commercial and residential riser applications.
$279.99 $349.99
In stock 12 Products
The Cat6E Plenum CCTCable EZP4YWIB is built for the job. This 1000-foot bulk spool gives you solid bare copper conductors in a splineless four-pair UTP design, which means easier pulls and terminations without the usual internal separator getting in the way. It is rated for 550 MHz extended testing and carries the UL 910 CMP FT6 plenum rating you need for air handling areas. The low smoke flame retardant jacket keeps safety standards high, while the 23 AWG copper core delivers the signal integrity required for Gigabit Ethernet and beyond. You are looking at support for everything from 10BASE-TX up through 1000BASE-T, plus headroom for emerging applications topping 3.2 Gbps. Packaged in an easy pull box and made in the USA, this cable is ETL verified to ANSI/TIA/EIA 568C.2 Category 6 and RoHS compliant, so it fits neatly into commercial and institutional builds where code compliance and performance both matters.
$319.99 $349.99
In stock 30 Products
The Wavenet Cat6A Riser cable (6A04URXX2) is a solid bare copper, 23 AWG unshielded twisted pair cable built for 10 Gigabit Ethernet over runs up to 1000 feet. It's rated to 750 MHz and verified to ANSI/TIA-568-C.2, so you're getting a cable that's been independently tested — not just claimed. The flame-retardant PVC jacket carries both CMR and FT4 fire ratings, which means it's code-compliant for vertical riser installations between floors. Inside, HDPE insulation keeps the signal clean, and a cross-web separator holds the four pairs in place to cut down on crosstalk. There's also a ripcord built in, which makes stripping the jacket during termination a lot less frustrating. It's RoHS compliant and C(ETL)US verified, and it comes on a 1000-foot spool — practical for large commercial or enterprise network builds where you're pulling a lot of cable at once.
$339.99
In stock 30 Products
Cat6A Plenum Wavenet 6A04UPXX2 750MHz 10G UTP 23AWG 1000ft Solid Copper ETL Certified Ethernet Cable
$494.99 $559.99
In stock 30 Products
Cat6A Plenum Wavenet 6A04UPXX2 750MHz 10G UTP 23AWG 1000ft Solid Copper ETL Certified Ethernet Cable
The Cat6A Plenum Wavenet 6A04UPXX2 is a 1000-foot solid bare copper Ethernet cable built for 10-Gigabit networks running at up to 750MHz. It uses 23AWG conductors across four unshielded twisted pairs, separated by a cross-shaped divider that keeps crosstalk low and signal quality high. The plenum-rated (CMP/FT6) flame-retardant PVC jacket makes it safe for air-handling spaces like drop ceilings and raised floors, which is where most commercial runs end up anyway. FEP insulation on each conductor handles heat well and maintains strong dielectric performance. It's ETL and C(ETL)US certified to TIA-568-C.2 standards and fully RoHS compliant.
$589.99 $598.99
In stock 30 Products
The Cat6A Plenum Wavenet 6A04FPBL2 is a 1000-foot reel of shielded solid bare copper Ethernet cable built for high-performance 10G networks running at frequencies up to 750MHz. It uses 23AWG conductors across four twisted pairs with an aluminum-foil shield wrapped around them, which helps block electromagnetic interference in electrically noisy environments like industrial floors or data centers. A cross-shaped separator sits between the pairs to keep crosstalk under control and maintain clean, stable signal paths over long runs. FEP insulation on each conductor handles heat well, while the flame-retardant PVC jacket carries a plenum CMP and FT6 rating, so you can run it safely through air-handling spaces like drop ceilings and raised floors. It is ETL and C(ETL)US certified to TIA-568-C.2 standards and fully RoHS compliant. The full 1000-foot box weighs 49 pounds and includes a ripcord for easier termination. You can get it in blue or white jacket colors, making cable identification simple across multiple network runs.
$194.99 $199.99
In stock 30 Products
If you are pulling cable between floors in a commercial building or multi-unit residence, this Wavenet Cat6 riser cable gives you the bandwidth and code compliance you need without paying for plenum-grade materials you do not require. It is rated for 600MHz on an unshielded twisted pair design built around 23 AWG solid bare copper conductors, so signal quality stays strong and consistent across the full thousand-foot run. The CMR and FT4 certifications satisfy inspectors in vertical shafts, while the Reelex II packaging on part number 6E04URXX4N feeds smoothly and resists tangles during long pulls. A separator inside the jacket keeps pair geometry consistent, the ripcord makes stripping fast and clean, and the flame-retardant PVC outer shell is tested to retain tensile strength even after high-temperature aging. Whether you are wiring IP cameras, wireless access points, VoIP phones, or standard Gigabit drops, this TIA-568-C.2 verified, RoHS-compliant spool covers the distance without complicating your install.
$187.99 $199.99
In stock 30 Products
If you are running permanent Ethernet links between floors and want clean cable management, this Wavenet Cat6 riser cable on a RIB reel is worth considering. It ships as part number 6E04URXX3N in a thousand-foot Reel-in-Box that dispenses neatly without the tangles of traditional coils. The cable is built from 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get strong signal quality without shield grounding. It is CMR and FT4 listed for vertical shaft work, TIA-568-C.2 verified, and RoHS compliant. Inside the jacket, a separator keeps pair geometry consistent and a ripcord helps you strip back the sheath quickly. The flame-retardant PVC outer layer is tested to hold up after high-temperature aging, and eight jacket colors are available to keep circuits organized. Whether you are pulling drops for IP cameras, wireless access points, or standard Gigabit runs, this spool gives you code-compliant performance in a box that makes the pull easier.
$289.99 $299.99
In stock 30 Products
When you are running cable through plenum airspaces and need smooth payout from a large reel, this Wavenet Cat6 plenum cable on Reelex II is worth looking at. It comes as part number 6E04UPXX4N with a thousand feet of 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz. The CMP and FT6 listings cover you in drop ceilings and ducts, while TIA-568-C.2 verification and RoHS compliance check the performance boxes. Inside the jacket, FEP insulation handles heat better than standard polyethylene, a separator keeps pair geometry intact, and a ripcord makes stripping straightforward. The Reelex II spool pays out without tangling, which matters when pulling long distances or working with multiple reels. You also get nine jacket colors including black, green, orange, and yellow alongside standard options, so organizing circuits by color is easy. Whether wiring a data center, hospital, or multi-story office, this spool delivers code-compliant performance with less hassle.
