233 products

Wavenet AC1402RXX4-500 14/2 OFC stranded bare copper riser CMR audio cable, 500ft. 14AWG 2-conductor, 105-strand OFC, PVC jacket, 300V, ETL listed.
Wavenet AC1404HFXMXX4-500 14/4 Glossy Waterblock UV Rated CMR 500ft Audio Cable. 14AWG 4C stranded oxygen-free bare copper with glossy waterblock PVC jacket. UL CL3 rated for riser and direct burial installations. 500ft REELEX II box.
Wavenet AC1404OSPBK3-500 14/4 Outdoor Direct Burial UV Rated CMR Audio Cable. 500ft reel in a box. 14AWG 4-conductor stranded oxygen-free bare copper. ETL Listed. Ideal for outdoor speaker and distributed audio installations.

In stock 30 Products

$414.99
Wavenet AC1404OSPBK4-500 14/4 Outdoor Direct Burial UV Rated 14AWG 4C CMR Riser Audio Cable. 500ft spool of oxygen-free bare copper stranded conductors with FR-PVC jacket. ETL Listed for communication and signal control systems.

In stock 30 Products

$414.99
Wavenet AC1404RXX4-500 14/4 OFC Stranded Bare Copper Riser 14AWG 4C CMR 500ft Audio Cable. ETL listed, 4 conductors, oxygen-free bare copper, 500ft REELEX II box. Ideal for in-wall speaker installations.
The Wavenet AC1602HFXMXX4-500 is a 16AWG 2-conductor stranded audio cable built for direct burial outdoor use. Featuring oxygen-free copper conductors (65x0.16mm), waterblock construction, and a UV-rated glossy PVC jacket, this 500ft spool delivers reliable signal transmission for landscape audio, commercial sound, and control systems. CL2/CL3 and CMR rated. Available in Black or White jacket.
The Wavenet AC1602OSPBK4-500 is a 16AWG/2C stranded riser CMR/CL3R direct burial audio cable built for permanent outdoor and in-wall installations. It features two oxygen-free bare copper conductors with 65-strand construction, a UV-rated FR-PVC jacket, and a paper tape plus rip cord inner layer for clean termination. ETL listed and rated for 300V with a temperature range of -20C to 70C. Ideal for direct burial, outdoor speaker runs, and in-wall installations requiring CMR/CL3R riser rating.

In stock 30 Products

$148.99
The Wavenet AC1602RXX4-500 is a 16 AWG 2-conductor oxygen-free copper (OFC) stranded audio cable in a 500ft REELEX II box. Rated CMR/CL3R riser for in-wall installations. ETL Listed, 300V, 75°C. Features 65-strand bare copper conductors per polarity, PVC insulation and jacket, and a nylon rip cord for easy stripping. Available in Black and White jackets.
Wavenet AC1602UPBK4-500 16/2 OFC Plenum Stranded Bare Copper 16AWG 2C CMP 500FT Audio Cable. ETL Listed, plenum-rated (CMP/CL3P) speaker wire with stranded OFC conductors for commercial in-wall installations.

In stock 30 Products

$198.99
The Wavenet AC1604HFXMXX4-500 is a premium 16AWG 4-conductor stranded audio cable built with oxygen-free copper (OFC) strands and a glossy UV-rated PVC jacket. Rated CMR for in-wall riser installations and suitable for direct burial outdoor use. Features 4 color-coded conductors (Black, Red, White, Green), sequential footage marking, and a nylon rip cord for easy stripping. Available in Black or White jacket in 500ft Reelex II packaging. Ideal for high-end commercial and residential speaker installations.
The Wavenet AC1604OSPBK4-500 is a professional-grade 16 AWG 4-conductor stranded oxygen-free bare copper audio cable rated for direct burial, outdoor UV exposure, and riser (CMR/CL3R) installations. With 65-strand OFC conductors, a UV-resistant FR-PVC jacket, and 300V voltage rating, this 500ft cable delivers reliable signal transmission for distributed audio, security, and communication systems. ETL Intertek Listed. Color-coded conductors (Black/Red/White/Green) for easy polarity identification. Packaged in Reelex II for tangle-free payout.

In stock 30 Products

$254.99
The Wavenet AC1604RXX4-500 is a 16AWG 4-conductor stranded OFC bare copper riser (CMR/CL3R) audio cable rated for in-wall installations. Features 65 strands per conductor, PVC insulation and jacket, 15.5Ω conductor resistance, and a 500ft REELEX II spool. ETL Listed. Available in Black or White.
Wavenet AC1604UPBK4-500 16/4 OFC Plenum Stranded Bare Copper 16AWG 4C CMP 500FT Audio Cable. ETL listed, NEC CMP FT6 rated. 4-conductor stranded OFC with Remguard Plenum Polymer jacket. Ideal for remote control, signaling, and power-limited circuit applications in plenum spaces.

In stock 30 Products

$324.99
The Wavenet 6E04URSPLSXX4N is a Cat6 riser cable that skips the central spline you find in most options, which makes it a lot easier to pull through conduits and terminate without fighting a rigid cross-member. It carries a CMR rating and FT4 flame classification, so it is fully approved for vertical riser shafts between floors in office buildings and retail spaces where plenum cable is not required. The cable uses 23 AWG solid bare copper conductors with HDPE insulation and a flame-retardant PVC jacket, keeping the outer diameter to about 0.205 inches. It is tested to 550 MHz and independently verified by ETL to ANSI/TIA-568-C.2, which means the performance is confirmed rather than just claimed. A ripcord sits under the jacket for quick stripping, and the 1000-foot Reelex II box keeps things manageable on the job site. It handles Gigabit Ethernet without issue and comes in nine colors, so you can color-code by floor or department if needed.
If you are pulling cable between floors in a commercial building or multi-unit residence, this Wavenet Cat6 riser cable gives you the bandwidth and code compliance you need without paying for plenum-grade materials you do not require. It is rated for 600MHz on an unshielded twisted pair design built around 23 AWG solid bare copper conductors, so signal quality stays strong and consistent across the full thousand-foot run. The CMR and FT4 certifications satisfy inspectors in vertical shafts, while the Reelex II packaging on part number 6E04URXX4N feeds smoothly and resists tangles during long pulls. A separator inside the jacket keeps pair geometry consistent, the ripcord makes stripping fast and clean, and the flame-retardant PVC outer shell is tested to retain tensile strength even after high-temperature aging. Whether you are wiring IP cameras, wireless access points, VoIP phones, or standard Gigabit drops, this TIA-568-C.2 verified, RoHS-compliant spool covers the distance without complicating your install.
The Wavenet H16E164MYL2-500 is a dual-cable combination that pairs a CAT6E 600MHz UTP network cable with a 16AWG 4-conductor audio cable on a single 500-foot RIB, making it a go-to choice for any AV or structured wiring installation that needs both data and speaker runs in the same pathway. The CAT6E side uses 23AWG bare solid copper conductors with HDPE insulation and a flame-retardant PVC jacket, rated through 600MHz for reliable Gigabit Ethernet performance. The 16AWG audio cable features four twisted copper conductors — color-coded Red, White, Yellow, and Blue — with a polyethylene/polypropylene insulation, a PVC jacket, and a 300V operating rating across a -20°C to +60°C temperature range. Both cables carry CMR and FT4 ratings for riser and in-wall use, and the assembly is ETL Listed under c(ETL)US. Packaged in a yellow-jacketed 500ft RIB for clean, tangle-free feeding on the job site.

In stock 30 Products

$409.99
The Wavenet H16E16QMBL2-500 combines a CAT6E 600MHz UTP cable and an RG-6 Quad Shield Coaxial Cable on a single 500-foot reel, making it a practical choice for any installation that needs both data and video in the same run. The CAT6E side uses 23AWG bare solid copper conductors with HDPE insulation and a flame-retardant PVC jacket, delivering reliable network performance through 600MHz. The RG-6 Quad Shield coaxial cable features a copper-covered steel center conductor, foam PE dielectric, dual bonded foil and dual Al-Mag braid shielding, a 75-ohm impedance, and a CMR/CL2-rated jacket — with factory sweep testing confirmed to 3.0GHz. Both cables carry a CMR rating for in-wall and riser use, and the assembly is ETL Listed for North American compliance. Sold as a 500ft reel in a blue jacket, part number H16E16QMBL2-500, this Wavenet combo cable saves time and conduit space on any structured wiring job.

In stock 30 Products

$219.99 $239.99
The Wavenet H26E26QMGN2-500 is a 500-foot reel combination cable that integrates two 23AWG CAT6E 600MHz UTP data cables and two 18AWG RG-6 Quad Shield coaxial cables into a single, green-jacketed assembly — letting installers deliver Gigabit Ethernet and broadband video to the same outlet location in a single wall pull. The CAT6E cables comply with TIA/EIA-568-C.2 and are ETL listed as CMR, supporting 1000BASE-T Gigabit Ethernet, Fast Ethernet, and ATM 155 Mbps applications. The quad-shielded RG-6 cables use a four-layer aluminum foil and braid construction, providing strong RF isolation and CATV performance swept and verified to 3.0GHz. Both cable types are RoHS compliant, CMR riser rated for vertical runs, and verified to C(ETL)US. Whether you're wiring a new home, an MDU building, or a hospitality property, this combination cable streamlines structured wiring while meeting the certification requirements of modern residential and commercial installations.

In stock 20 Products

$524.99 $609.99
$1,149.99 $1,244.99

In stock 30 Products

The Wavenet RG11PWH2 is a 14AWG RG-11U Plenum-rated (CMP) broadband coaxial cable built for professional CATV and signal distribution installations where fire code compliance is required. It features a Copper-Clad Steel center conductor surrounded by FEP dielectric insulation, a dual-shield system consisting of an aluminum/poly tape foil and a 60% aluminum braid, and a Plenum PVC outer jacket in white. Rated for 75 Ohm impedance with a velocity of propagation of 84%, this cable handles frequencies swept and tested to 3.0 GHz, with attenuation as low as 0.09 dB/100m at 1 MHz and 9.88 dB/100m at 3000 MHz. Compliant with UL 1655, UL 13, UL 444, SCTE IPS-SP-001, and ROHS, it's UL listed and NEC-rated for safe installation in air-handling plenum spaces. Available in a 1000-foot reel at a nominal weight of 63 lbs.

In stock 30 Products

$1,149.99 $1,244.99
$224.99 $254.99

In stock 30 Products

The Wavenet RG11QRBK2 is a 14AWG RG-11U Quad Shield Riser-rated (CMR) broadband coaxial cable engineered for vertical in-building signal distribution where strong shielding and low signal loss are essential. It's built around a Copper-Clad Steel center conductor insulated with foam polyethylene, wrapped in a quad-shield system of aluminum foil and 60% aluminum braid, and finished with a black PVC CMR-rated jacket. Electrically, the cable holds a 75 Ohm impedance with a velocity of propagation of 82% and a capacitance of 15.5 pF/ft, with attenuation measured from 1.50 dB/100m at 5 MHz through 25.60 dB/100m at 3000 MHz swept and ETL-verified to 3.0 GHz. Compliant with SCTE, UL 444, and ROHS, and ETL Listed through Intertek, it's packaged on a 1000-foot reel weighing 64 lbs., ready for professional CATV and broadband riser installations.

In stock 30 Products

$224.99 $254.99
Shopping cart

Your cart is empty.

Return to shop