$499.99
In stock 4 Products
The CommScope CS34P Category 6 F/UTP Shielded Plenum cable (UN874043904/10) is a premier enterprise-grade networking cable engineered for superior signal isolation and high-frequency data transmission in commercial plenum spaces. Manufactured under CommScope's Uniprise® portfolio, this cable features 4 pairs of 23 AWG solid bare copper conductors, premium FEP insulation, an FEP isolator center separator, and an overall aluminum/polyester foil shield with a 26 AWG solid tinned copper drain wire to eliminate EMI and RFI interference. Rated CMP/FT6 (NFPA 262 / UL 444 / UL 910 / NEC Article 800) for drop ceilings and environmental air-handling plenums, it is certified to ANSI/TIA-568.2-D and ISO/IEC 11801 Class E standards up to 250 MHz. It fully supports high-performance applications including Gigabit Ethernet, 10GBASE-T, and high-power IEEE 802.3bt Type 4 PoE++ (up to 100W). Supplied on a 1,000-foot blue reel, it delivers exceptional reliability, structural durability, and transmission headroom for critical network infrastructure.
$599.99 $700.00
In stock 19 Products
The General Cable GenSPEED 10,000 Category 6A Plenum (CMP) cable (part number 7131826) is a premier enterprise-grade networking cable engineered for 10GBASE-T transmission performance and superior signal isolation. Manufactured with 23 AWG solid bare annealed copper conductors, fluoropolymer insulation, and an innovative T-Top cross-web separator, this cable locks pairs into a systematic internal orientation to maximize electrical balance. It features General Cable's signature AirEs jacket technology, delivering exceptional flexibility and cable-to-cable pair separation for consistent alien crosstalk suppression (PSANEXT and PSAACRF). Certified CMP (NFPA 262) for plenum air spaces and tested to 500 MHz, it supports high-bandwidth data center backbones, IEEE 802.3bt PoE/PoE+, and building automation. Supplied on a 1,000-foot orange spool with TRU-Mark descending footage markings, this high-performance cable is proudly made in the USA.
$499.99 $700.00
In stock 3 Products
The Prysmian GenSPEED 9136100 Category 6A Outside Plant (OSP) cable is a high-performance 23 AWG solid bare annealed copper networking solution engineered for demanding outdoor, duct, and conduit deployments. Built with a robust UV- and abrasion-resistant black polyethylene (PE) jacket, an innovative cross-web pair separator, and a polyester encapsulated isolation core wrap, this cable provides superior alien crosstalk suppression (PSANEXT/PSAACRF) and mechanical protection in extreme weather conditions ranging from -45°C to +80°C. Verified to ANSI/TIA 568.2-E and swept up to 500 MHz, it supports 10GBASE-T 10 Gigabit Ethernet up to 100 meters, 100W PoE++ (IEEE 802.3bt Type 4), and broadband/digital video. Featuring dry core construction for rapid, clean termination and TRU-Mark® descending footage markings, this 1000-foot spool is proudly manufactured in the USA for enterprise and campus backbone networks.
$1,399.99 $1,500.00
Contact for Availability
The Berk-Tek 10143424 LANmark-10G FTP Plenum Category 6A cable is an enterprise-grade 23 AWG solid bare copper Ethernet solution engineered for high-bandwidth horizontal premise network infrastructure. Featuring an overall polyester/aluminum foil shield (F/UTP design) with a stranded tinned copper drain wire, this cable delivers superior alien crosstalk (PSANEXT) suppression and outstanding EMI/RFI noise isolation while maintaining a compact 0.275-inch outer diameter for simplified termination and lower installation costs. Manufactured in the USA and certified to NFPA 262 (CMP) and UL CMP-LP (0.7A), it supports continuous high-temperature operation up to 105°C and provides full compliance with IEEE 802.3bt Type 4 PoE++ (up to 100W). Certified to ANSI/TIA-568.2-D Category 6A with transmission performance guaranteed to 500 MHz and sweep tested to 750 MHz, this 1000-foot blue reel Ethernet cable is optimized for 10GBASE-T enterprise networks, data centers, healthcare facilities, and high-density PoE installations.
Contact for Availability
$1,399.99 $1,500.00
$389.99 $600.00
In stock 1 Products
The Belden 3613 Category 6+ Premium Plenum cable is an enterprise-grade 23 AWG solid bare copper Ethernet solution engineered for demanding commercial, medical, data center, and institutional networking infrastructure. Featuring Belden's patented X-Spline® internal pair separator and a durable flame-retardant Flamarrest® low-smoke PVC jacket, this cable delivers certified bandwidth headroom verified up to 400 MHz and sweep-tested to 650 MHz. Engineered specifically for air-handling plenum spaces, dropped ceilings, and raised floors, it satisfies strict NFPA 262 and NEC Article 800 CMP flammability standards. In addition, the cable reliably powers high-draw network endpoints via full IEEE 802.3bt Type 4 PoE++ compliance up to 100 watts. Supplied on a heavy-duty 1000-foot spool reel, it includes descending footage markings to simplify installation tracking and eliminate scrap. Third-party verified to ANSI/TIA-568.2-D standards, the Belden 3610 Cat6+ CMP cable provides outstanding crosstalk isolation, minimal signal attenuation, and exceptional electrical performance for mission-critical Gigabit Ethernet backbones.
$184.99
Contact for Availability
Superior Essex 77-240-5A Cat6 Riser UTP 23AWG solid copper cable, 1000ft POP Box. UL Verified Cat 6, CMR-rated PVC jacket. Supports 1000BASE-T and PoE IEEE 802.3bt Types 1-4. Made in USA. Meets ANSI/TIA-568.2-E standards for reliable enterprise and residential network infrastructure.
$1,234.99 $3,000.00
In stock 7 Products
The Belden 10GX63F is a Category 6A Enhanced Plenum horizontal cable built for high-performance enterprise networks where both 10 Gigabit Ethernet and high-wattage PoE are in play. Running on four bonded pairs of 23 AWG solid bare copper conductors insulated with FEP and enclosed in a 100% bi-laminate foil shield, it delivers F/UTP shielding in a 0.310-inch nominal diameter package rated to 625MHz. The Flam arrest CMP-rated outer jacket passes UL 910 and NFPA 262, qualifying it for air-handling plenum spaces without conduit. It's TIA-568.2-D Cat6A and ISO/IEC 11801-1 compliant, IEEE 802.3bt rated through Type 4 for PoE++, and listed for 10GBASE-T, Wi-Fi 6, HDBaseT, and surveillance applications. Belden's patented X-Spline® center member and dual ripcords make field termination cleaner. Available on 1,000ft reels in six colors — black, blue, gray, red, white, and yellow.
$329.99 $464.99
Contact for Availability
If you're looking for serious network infrastructure cable, the Belden 2413F Cat6+ plenum cable is built for professional installations where performance and safety can't be compromised. This 1000-foot spool features genuine 23 AWG solid bare copper conductors—not copper-clad aluminum—delivering the kind of signal integrity you need for 10-gigabit Ethernet runs and Power over Ethernet applications including PoE++. What makes this cable particularly valuable is its CMP plenum rating, which means you can legally run it through air return ducts and dropped ceilings in commercial buildings without violating fire codes. The foil shielding (F/UTP) handles noisy electrical environments beautifully, while the Flam arrestor low-smoke jacket adds another layer of fire protection. With a 350MHz bandwidth specification and support for everything from basic 100BASE-T networks to advanced surveillance systems, this USA-made cable covers virtually every horizontal cabling scenario you'll encounter in data centers, hospitals, schools, or office buildings. Just note that Belden has transitioned this model to the updated 2413FS version.
$509.99 $649.99
In stock 1 Products
The Berk-Tek LANmark-10G2 (part number 10137694) is a Cat6A plenum-rated UTP cable in green, built with 23 AWG solid bare copper conductors insulated in FEP and wrapped in a flame-retardant PVC jacket. What sets it apart is the factory performance guarantee — every reel passes testing with margins of 2 dB for NEXT/PSNEXT and 4 dB for ACRF/PSACRF beyond the Cat6A standard before it ships. It's characterized to 750 MHz, giving you 250 MHz of headroom over the minimum requirement, and supports everything from 10GBASE-T down to legacy 10BASE-T. The patented round design keeps the outer diameter at 0.300 inches while minimizing alien crosstalk, which makes a real difference in dense cable bundles. It comes on a 1000-foot reel, is ETL listed and RoHS compliant, and handles voice, video, and data simultaneously across converged networks. Made in the USA by Berk-Tek.
$239.99 $309.99
In stock 3 Products
The Vertical Cable 166-254/P/OR is a Cat6 plenum Ethernet cable that ships in a 1000-foot moisture-resistant pull box, built and tested in the USA for commercial installations where fire codes require CMP-rated cabling. It uses 23 AWG solid bare copper conductors with fluoropolymer insulation and a mini filler spline that keeps the four pairs properly spaced to control crosstalk without adding bulk. The cable is tested to 550 MHz and ETL-verified to ANSI/TIA-568.2-D, with LinkWare testing showing a pass with 7.1 dB of headroom. It supports legacy Fast Ethernet and Gigabit through 10GBASE-T, plus 2.5G and 5G speeds, and handles PoE, PoE+, and up to 60W PoE++ for powering access points and cameras through the cable. The bright orange jacket and vivid conductor colors make terminations faster, while the compact 0.214-inch diameter and 0.9-inch minimum bend radius help in tight ceiling spaces. At 27 pounds per box, it's manageable to transport and handle on the job site.
$539.99 $684.99
Contact for Availability
The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4).
Contact for Availability
$539.99 $684.99
$489.99 – $499.99
In stock 7 Products
The Remee 6UB234UTP is a Category 6A augmented plenum Ethernet cable rated to 500 MHz — well above the standard Cat6A minimum — making it a dependable choice for 10 Gigabit network installations in commercial buildings, schools, hospitals, and data-heavy environments. It's built with 23 AWG solid bare copper conductors insulated in FEP, assembled around a central pair separator, and finished with a low-smoke, flame-retardant PVC jacket that carries a full CMP plenum rating and FT6 flame classification. The cable is C(ETL)US Listed, meaning its Category 6A performance has been independently verified — not just self-certified. Beyond standard Ethernet, it also supports ATM, RS-422, AES/EBU digital audio, and NTSC/PAL video applications. With a 40.8 lbf maximum pull tension and a 1.250-inch minimum bend radius, it's built to handle the physical demands of real cable pulls. Manufactured in the USA and clearly surface-printed for easy compliance verification on the job.
$549.99 $700.00
In stock 1 Products
The Belden DAUP is a Cat6A plenum-rated Ethernet cable built for real 10 Gigabit performance in commercial and enterprise environments. It uses 23 AWG solid bare copper conductors insulated with FEP, keeping signal loss low and electrical characteristics stable across long horizontal runs. The Flamarrest CMP-rated jacket meets NFPA 262 and UL 910 plenum fire standards, making it fully approved for use in air-handling ceiling spaces where fire codes are strict and non-negotiable. Belden's patented X-Spine® center member keeps all four pairs evenly spaced throughout the cable, while EquiBlock Barrier Technology cuts down alien crosstalk in dense, bundled cable runs. Full IEEE 802.3bt PoE++ support covers Type 1 through Type 4, so you can power IP cameras, wireless access points, and VoIP phones right through the cable. Each 1,000ft reel includes descending footage and meter markings printed on the jacket, making it easy to track exactly how much cable you've pulled on any job.
$539.99 $700.00
In stock 4 Products
The BERK-TEK RDT Cat 6A UTP CMP Cable (Part No. 11143780) comes in an orange jacket on a 1000ft reel, built specifically for installers who need both performance and practicality in a single package. At just 0.230 inches in diameter, it fits more cable runs into the same conduit space compared to standard Cat 6A cables, and the 0.92-inch minimum bend radius means tight corners aren't a problem anymore. It supports 10GBASE-T, PoE++ (Types 1–4), 802.11ac wireless, HD video, and IP security — basically anything a modern enterprise network demand. ETL-verified performance guarantees 8 dB of margin above Cat 6A requirements for alien crosstalk protection. No cross filler, Leviton FLX-1 technology, and Precision Twist Technology combine to keep pulls smooth and signal quality consistent across every foot of the run. The plenum CMP jacket is UL Listed at CMP-LP (0.7A) and rated to 105°C. Made in the USA and fully RoHS compliant.
$599.99 $819.99
Contact for Availability
The BERK-TEK RDT Cat 6A UTP CMP Cable in Blue (Part No. 11142454) is a 1000ft plenum-rated Ethernet cable built for demanding, high-density network installations. Its slim 0.230-inch outer diameter packs more cables into the same conduit space compared to standard Cat 6A options, without sacrificing signal quality. Built on 23 AWG bare copper with four twisted pairs, it comfortably handles 10GBASE-T speeds alongside 2.5G and 5G applications and fully supports PoE Types 1 through 4. Leviton's FLX-1 technology and the cross-filler-free design make it noticeably easier to bend, pull, and route — even through tight runs. ETL-verified performance exceeds the ANSI/TIA-568.2-D Category 6A standard, with an 8 dB margin on alien crosstalk measurements that gives you extra headroom in dense installations. The CMP fire rating covers it for plenum air spaces, and it ships in a TEKPAK Box for snag-free pulls. Made in the USA and RoHS compliant.
Contact for Availability
$599.99 $819.99
$269.99 $470.00
Contact for Availability
The Genesis 51931006 is a Category 6A riser-rated cable that delivers verified 10 Gigabit Ethernet performance across 1000 feet of solid bare copper. Built with 23 AWG conductors and tested to 700 MHz, it exceeds TIA-568.2-D Cat 6A requirements with room to spare. It carries UL 1666 CMR, CSA FT4, ETL verification, and full RoHS/REACH compliance, making it approved for riser runs, metal raceways, and sunlight-exposed environments in both the US and Canada. The built-in rip cord speeds up termination, and Genesis Countdown® length markings on the jacket help track remaining cable throughout the pull. A reliable, well-certified choice for commercial and enterprise network installations.
Contact for Availability
$269.99 $470.00
$254.99 $350.00
In stock 3 Products
The Belden D6UP is a Category 6 plenum-rated cable designed for demanding commercial network environments where both speed and safety compliance are critical. It features 23 AWG solid bare copper conductors, insulated with PO+FEP for consistent signal quality, and a Flamarrest® low-smoke PVC jacket that meets CMP, NFPA 262, and UL 910 fire code requirements. At just 0.224 inches in diameter, it fits cleanly into high-density installations without crowding pathways. The cable supports Gigabit and Fast Ethernet, IP surveillance, and all three PoE generations, including PoE++. Compliance with ANSI/TIA-568.2-D, ISO/IEC 11801-1, and IEEE 802.3 standards is confirmed, along with full RoHS and REACH certification. The 1000-foot UnReel spool and built-in ripcord make installations faster and cleaner. Available in nine colors for organized cable identification.
$599.99 $874.99
Contact for Availability
The Panduit TX6A plenum-rated cable brings 10GBASE-T Ethernet performance to demanding network installations with its slim 0.230-inch diameter design. Built with 23 AWG solid copper conductors and FEP insulation, this Category 6A certified cable exceeds ANSI/TIA and ISO standards while supporting all PoE standards including IEEE 802.3bt. The metallic barrier tape construction minimizes alien crosstalk and allows dense installations in existing pathways. With an extended operating temperature range up to 221°F, it handles high-density cabinet environments running advanced PoE applications. The 1000-foot reel includes descending length markings for efficient installations, and the headroom warranty provides margins above industry benchmarks for long-term reliability in data centers, server virtualization, and backbone aggregation projects.
Contact for Availability
$599.99 $874.99
$249.99 $384.99
Contact for Availability
Upgrade your network infrastructure with the Berk-Tek SST Cat 6A UTP Riser Cable, a premium solution designed to handle the rigorous demands of modern technology. Manufactured in the USA, this cable sets the standard for high-performance networking by utilizing a unique isolation wrap that effectively cancels noise and manages heat. This innovation allows it to support high-power applications, including 100 Watt PoE, without the interference issues common in standard setups.
Contact for Availability
$249.99 $384.99
$279.99 $399.99
Contact for Availability
The Panduit TX6 Cat6 plenum cable features 23 AWG solid copper conductors and delivers certified performance up to 250MHz, exceeding TIA standards. This 1000-foot white cable supports Gigabit Ethernet, PoE applications, and operates in extended temperature ranges from -4°F to 221°F. UL Listed CMP rating ensures safe installation in air-handling spaces, while the low smoke PVC jacket meets NFPA 262 flame standards. Packaged in easy-payout cartons with descending length markings for efficient installation and reduced waste.
Contact for Availability
$279.99 $399.99
