82 of 288 products

The ADI Pro Cat6 cable features a precision-engineered design with four twisted pairs of 23 AWG solid bare copper conductors, each insulated with FEP. The pairs are separated by an FR spline that reduces crosstalk and maintains the cable's electrical properties. A longitudinal rip cord is included under the low-smoke, flame-retardant plenum jacket for easier termination. The cable's construction ensures compliance with strict fire safety regulations while maintaining superior transmission characteristics across the full frequency range.
The GenSPEED 10 UTP Gen5 represents a breakthrough in Category 6A cabling with the industry's smallest diameter at just 0.230 inches. This American-made cable delivers exceptional 10G performance with a guaranteed +2 dB margin over TIA 568.2-D standards for alien crosstalk protection. Featuring 23 AWG solid copper conductors and proprietary encapsulated isolation wrap technology, the Gen5 design simplifies installation with improved bend radius and easier termination. It's UL-listed CMP-LP 0.7A certified for high-power PoE applications up to 140 watts and HDBaseT verified for 100W power transmission.
The GenSPEED is a high-performance Category 6A F/UTP cable designed for demanding 10 Gigabit Ethernet applications. Made in the USA, this shielded solution features 23 AWG solid copper conductors with an aluminum foil shield that provides exceptional protection against alien crosstalk. Its innovative cross-web separator maintains optimal pair geometry while keeping the cable diameter to just 0.320 inches for easier installation. With a temperature rating of -20°C to +75°C and a 40-pound maximum pulling force, the GenSPEED 10000 exceeds ANSI/TIA 568-C.2 standards across all key electrical parameters.
$679.99 $799.99

In stock 1 Products

The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4). The CMP plenum rating and UL listing make it fully compliant for air-handling spaces. Manufactured in the USA, available in multiple colors, and backed by Leviton's product warranty.

In stock 1 Products

$679.99 $799.99
Get the Berk-Tek LANmark-6 CAT6 Plenum Cable (Part# 10136230) 1000ft. CMP rated, UL Listed, and RoHS compliant for superior networking. Shop now at the best price!

Contact for Availability

$259.99 $300.00
$1,499.99 $3,500.00

In stock 52 Products

DataTuff® Cat 5e, 4 Bonded-Pr #24 Sol BC, PO Ins, OS, PO Jkt, PO Jkt, OSP BURIAL, Cat 5e, 4 Pairs, 24 AWG, Twisted Pair, Solid, Bare Copper, Polyolefin Insulation, LLPE Jacket, 7937A Multi-Conductor Cable, 24/8, Non-Plenum, 1000 ft.

In stock 4 Products

$499.99 $1,600.00
700208101 | 2071E WHT C6 4/23 U/UTP W1000 Base Product: 2071E GigaSPEED XL® 2071E ETL Verified Category 6 U/UTP Cable, plenum, white jacket, 4 pair count, 1000 ft (305 m) length, WE TOTE® box
ICE CAT6 Plenum Cable, featuring 23 AWG solid copper conductors, 550 MHz bandwidth, and UL Listed safety. Made in the USA and TAA compliant, this green 1000ft cable ensures high-speed, reliable performance for Ethernet, Gigabit, VoIP, and CCTV installations.
BERK-TEK | 10032227 HyperPlus 5e, Category 5e Plenum UTP Data Cable 24 AWG 4 pair solid bare copper conductors FEP insulation Flame-retardant jacket Box of 1000 feet
SUPERIOR ESSEX 770-240-XB Cat6 Plenum Solid Copper White Color USA-Made 1000 Feet Box UL Listed TAA Compliant.
The GenSPEED 7141819 Cat6A Plenum Solid Copper 1000ft UTP Blue Ethernet Cable is a high-performance network cable featuring 23 AWG solid bare copper conductors and an Encapsulated Isolation Wrap for superior ANEXT protection. It supports 10GBASE-T Ethernet, PoE, PoE+, and PoE++ applications and is plenum-rated with a low-smoke, flame-retardant PVC jacket, making it ideal for safe installation in commercial settings. With a compact design, improved bend radius, and UL-listed CMP-LP 0.6A certification.
The GenSPEED 7141851 Cat6A Plenum Solid Copper Ethernet Cable is a 1000ft UTP cable designed for high-performance networking, featuring 23 AWG solid bare annealed copper conductors. Its plenum-rated, low-smoke, flame-retardant PVC jacket meets strict fire safety standards, making it ideal for commercial installations. The cable uses Mosaic™ Variable Laser Cut Tape for superior Alien Crosstalk (ANEXT) and EMI protection and supports 10GBASE-T Ethernet, PoE, PoE+, and PoE++. Its compact design allows for easier installation with a bend radius of 1 inch, and it is UL Listed CMP-LP 0.7A for high-power PoE applications, with temperature ratings up to 105°C.
The Superior Essex 54-246-MB is a high-performance Cat6 Plenum cable that goes beyond standard specifications. This 1000ft teal Ethernet cable offers a whopping 7 dB margin over typical Cat6 NEXT requirements, making it a future-proof choice for demanding network installations. With its solid copper conductors, FEP insulation, and flame-retardant LS-PVC jacket, it's built to handle speeds up to 1000BASE-T and supports PoE applications. The cable's positive ACR beyond 300 MHz ensures top-notch performance for bandwidth-hungry tasks. It's plenum-rated for use in air spaces and comes with nifty features like ColorTip identification and the BrakeBox payout system for easy installation.
The Belden 633938 is a top-notch RG6 coax cable for indoor CATV, MATV, and surveillance systems. This plenum-rated cable features an 18 AWG solid bare copper conductor wrapped in foam FEP insulation, with Belden's signature Duofoil® shield and 90% aluminum braid for stellar signal quality. With a 75 Ohm impedance, 83% velocity of propagation, and impressive attenuation performance up to 1000 MHz, this cable delivers exceptional video and data transmission. It's available in 1000ft spools in various colors, withstand temperatures from -20°C to 75°C, and complies with major environmental regulations. Whether wiring up a building or setting up a surveillance system, the Belden 633938 has got you covered.

Contact for Availability

$199.99 $500.00
The Panduit Cat6 Plenum TX6 UTP 1000ft Ethernet Cable is a high-performance networking solution designed to exceed Category 6 standards, supporting frequencies up to 250 MHz. Featuring 24 AWG solid copper conductors with FEP/polyolefin insulation, this cable ensures reliable data transmission over long distances. It is flame-rated for NFPA 262 and CSA FT-6, making it safe for plenum spaces. The cable has a low-smoke, flame-retardant jacket and comes in a 1000 ft easy-pull box. Ideal for Ethernet applications, including Gigabit and 10GBASE-T.
The General Cable 7131100 GenSpeed Cat6 Plenum Solid Copper 1000ft UTP Blue Cable is a high-performance networking solution designed for modern data communications. This 24 AWG solid copper cable features a unique separator design for consistent electrical performance, supports speeds up to 1000 BASE-T, and is compatible with PoE, PoE+, and PoE++. Plenum-rated (CMP) for use in air handling spaces, it meets ANSI/TIA 568.2-D standards and is suitable for various applications, including Gigabit Ethernet, digital video, and building automation. With a nominal diameter of 0.205 inches, a temperature rating of -20 to +75°C for operation, and third-party verification for guaranteed performance, this USA-made cable offers reliability and versatility for demanding commercial and industrial networking needs.
CommScope 2091B is a high-performance Category 6A U/UTP Ethernet cable, designed for demanding network environments. This 1000ft plenum-rated cable supports 10 Gigabit Ethernet up to 550 MHz, exceeding ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA standards. Part of the SYSTIMAX GigaSPEED X10D family, it features advanced dual-layer separator technology, PoE compatibility, and global certifications. Ideal for data centers, enterprise networks, and mission-critical applications, the 2091B offers future-proof performance and reliable connectivity in a robust, easy-to-install package.
CommScope 2091SDB Cat6A Plenum Blue 1000ft Ethernet Cable is a high-performance U/UTP solution for demanding network installations. This 23 AWG solid copper cable exceeds ANSI/TIA-568.2-D standards, supporting 10 Gigabit Ethernet up to 500 MHz. With its CMP/FT6 plenum rating and advanced isolator technology, the 2091SDB is ideal for data centers, enterprise networks, and PoE applications. Part of the trusted SYSTIMAX GigaSPEED X10D family, this 1000ft spool offers reliable, future-proof performance for modern networking needs.
Shopping cart

Your cart is empty.

Return to shop