Wavenet CAT6 Plenum Cables

CAT6 550MHz UTP Plenum cable delivers exceptional bandwidth capabilities that exceed standard CAT6 requirements. This 23 AWG solid copper cable features a no-spline design for easier installation while maintaining superior signal integrity. With its CMP/FT6 fire rating, it's perfect for commercial spaces where building codes require plenum-rated materials. The cable supports all your high-speed networking needs with impressive specs: 550MHz bandwidth, 47.3 dB NEXT at 100MHz, and 69% nominal velocity of propagation.

Wavenet Cat6 Plenum (CMP) 550MHz UTP cable, 23AWG solid bare copper, non-spline design, 1000ft pull box in Black. Plenum-rated jacket for low-smoke, low-flame installations in air handling spaces. Meets TIA/EIA-568-C.2 and exceeds Cat6 channel requirements for 10GBASE-T-ready structured cabling.

If you're pulling cable through plenum spaces, this Cat6 Plenum Wavenet 6E04FPXX2N is the real deal. It's rated for air handling areas with CMP and FT6 designation, and the low smoke flame-retardant PVC jacket won't give off toxic fumes if things heat up. You get four 23AWG solid bare copper pairs wrapped in FEP insulation, which keeps signal integrity tight even when you're pushing higher bandwidth. The aluminum foil shield blocks electromagnetic interference, and the drain wire gives you a solid ground path. It handles frequencies up to 600MHz, so you've got room beyond standard gigabit. The reel gives you a full 1000 feet at a nominal 49 pounds. Installation temperature sits between zero and seventy-five degrees Celsius, with operation down to negative twenty. Wavenet built this to TIA-568-C.2 standards with ETL verification, and the ripcord makes stripping the jacket easier. Whether it's a school, hospital, or office retrofit, this cable checks the boxes for code compliance and performance.

When you are running cable through plenum airspaces and need smooth payout from a large reel, this Wavenet Cat6 plenum cable on Reelex II is worth looking at. It comes as part number 6E04UPXX4N with a thousand feet of 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz. The CMP and FT6 listings cover you in drop ceilings and ducts, while TIA-568-C.2 verification and RoHS compliance check the performance boxes. Inside the jacket, FEP insulation handles heat better than standard polyethylene, a separator keeps pair geometry intact, and a ripcord makes stripping straightforward. The Reelex II spool pays out without tangling, which matters when pulling long distances or working with multiple reels. You also get nine jacket colors including black, green, orange, and yellow alongside standard options, so organizing circuits by color is easy. Whether wiring a data center, hospital, or multi-story office, this spool delivers code-compliant performance with less hassle.

If you are pulling cable through a drop ceiling or air handling space where the fire inspector demands CMP-rated materials, this Wavenet Cat6 plenum cable on a RIB reel is built for exactly that. It ships as part number 6E04UPXX3N in a thousand-foot Reel-In-Box that pays out cleanly without the mess of loose coils. The cable uses 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get clean signal without grounding shields. It is CMP and FT6 listed for plenum spaces, TIA-568-C.2 verified, and RoHS compliant. Inside, FEP insulation handles higher temperatures than standard polyethylene, a separator keeps the pairs aligned, and a ripcord lets you strip the jacket without nicking conductors. The flame-retardant PVC outer shell is tested to maintain tensile strength after high-temperature aging. Available in blue, grey, red, purple, and white, this spool covers permanent Gigabit runs in commercial buildings, schools, and healthcare facilities where airspace safety matters.