$294.99 $339.99
In stock 28 Products
Running a reliable network outside can be a massive headache if you do not have the right cable on hand. When you need to push a fast connection underground or between buildings, this direct burial Wavenet networking cable is a lifesaver. It arrives on a large reel equipped with a heavy black, sunlight resistant jacket designed to withstand harsh outdoor elements. Since it features an aluminum foil shield and a dedicated drain wire, it actively fights off electromagnetic interference that could otherwise disrupt your network traffic. Underneath the tough exterior, you will find four pairs of solid bare copper conductors measuring twenty three gauge, each physically separated to reduce internal crosstalk. The design meets strict industry standards and operates safely in temperatures dropping down to twenty below zero Celsius. You can comfortably bury this shielded wire right into the dirt without needing separate protective conduit, making your next outdoor installation much easier and significantly faster.
Cat6 Direct Burial Wavenet 6EOSPGBK2N Gel Filled 600MHz UTP 23AWG 1000ft Solid Copper Ethernet Cable
$294.99 $339.99
In stock 29 Products
Cat6 Direct Burial Wavenet 6EOSPGBK2N Gel Filled 600MHz UTP 23AWG 1000ft Solid Copper Ethernet Cable
If you need to run a fast network connection outdoors or underground, this gel filled networking cable is exactly what you are looking for. Built by Wavenet, this thousand foot direct burial reel is designed to withstand harsh outdoor environments without losing signal quality. The thick sunlight resistant outer jacket protects against UV damage, while the internal gel actively repels moisture or groundwater from penetrating the lines. It features robust solid bare copper wires configured into four twisted pairs, making it highly reliable for demanding data requirements. Rated for up to six hundred megahertz, it handles gigabit speeds beautifully for security cameras, outbuilding connections, or campus network extensions. You will not have to worry about frustrating crosstalk either, thanks to the physical cross separator inside. Running networking outdoors does not have to be stressful when you choose proper cabling. Bring reliable, weatherproof internet connectivity to your property today with this tough solution that is built to perform and last.
$297.99
In stock 30 Products
If you're running network drops through vertical shafts or between floors, this Cat6 Riser Wavenet cable is built for that exact job. It handles up to 600MHz bandwidth across four solid bare copper pairs with HDPE insulation, giving you headroom for gigabit and beyond. The aluminum foil shield reduces electromagnetic interference, and the flame-retardant PVC jacket carries a CMR rating with FT4 certification, so it meets code for riser installations. You get a full 1000 feet on a reel, and the 23AWG solid conductors keep signal loss minimal over longer runs. Wavenet built this to TIA-568-C.2 standards with ETL verification, and the cable includes a ripcord and separator to make termination easier. Operating temperature spans from negative twenty up to seventy-five degrees Celsius, so it handles most building environments. Whether you're wiring an office building, school, or apartment complex, this is the cable you pull when you need shielded performance in a riser-rated jacket.
$194.99 $199.99
In stock 30 Products
The Wavenet 6E04URSPLSXX4N is a Cat6 riser cable that skips the central spline you find in most options, which makes it a lot easier to pull through conduits and terminate without fighting a rigid cross-member. It carries a CMR rating and FT4 flame classification, so it is fully approved for vertical riser shafts between floors in office buildings and retail spaces where plenum cable is not required. The cable uses 23 AWG solid bare copper conductors with HDPE insulation and a flame-retardant PVC jacket, keeping the outer diameter to about 0.205 inches. It is tested to 550 MHz and independently verified by ETL to ANSI/TIA-568-C.2, which means the performance is confirmed rather than just claimed. A ripcord sits under the jacket for quick stripping, and the 1000-foot Reelex II box keeps things manageable on the job site. It handles Gigabit Ethernet without issue and comes in nine colors, so you can color-code by floor or department if needed.
$284.99 $299.99
In stock 30 Products
CAT6 550MHz UTP Plenum cable delivers exceptional bandwidth capabilities that exceed standard CAT6 requirements. This 23 AWG solid copper cable features a no-spline design for easier installation while maintaining superior signal integrity. With its CMP/FT6 fire rating, it's perfect for commercial spaces where building codes require plenum-rated materials. The cable supports all your high-speed networking needs with impressive specs: 550MHz bandwidth, 47.3 dB NEXT at 100MHz, and 69% nominal velocity of propagation.
$259.99 $299.99
In stock 19 Products
Wavenet Cat6 Plenum (CMP) 550MHz UTP cable, 23AWG solid bare copper, non-spline design, 1000ft pull box in Black. Plenum-rated jacket for low-smoke, low-flame installations in air handling spaces. Meets TIA/EIA-568-C.2 and exceeds Cat6 channel requirements for 10GBASE-T-ready structured cabling.
$409.99
In stock 30 Products
The Wavenet H16E164MYL2-500 is a dual-cable combination that pairs a CAT6E 600MHz UTP network cable with a 16AWG 4-conductor audio cable on a single 500-foot RIB, making it a go-to choice for any AV or structured wiring installation that needs both data and speaker runs in the same pathway. The CAT6E side uses 23AWG bare solid copper conductors with HDPE insulation and a flame-retardant PVC jacket, rated through 600MHz for reliable Gigabit Ethernet performance. The 16AWG audio cable features four twisted copper conductors — color-coded Red, White, Yellow, and Blue — with a polyethylene/polypropylene insulation, a PVC jacket, and a 300V operating rating across a -20°C to +60°C temperature range. Both cables carry CMR and FT4 ratings for riser and in-wall use, and the assembly is ETL Listed under c(ETL)US. Packaged in a yellow-jacketed 500ft RIB for clean, tangle-free feeding on the job site.
$294.99 $339.99
In stock 30 Products
If you are running network cable outdoors and need something that can handle the elements without separate conduit, this Wavenet Cat6 direct burial cable is worth a look. It is rated for 600MHz and comes on a 1000ft reel, giving you plenty for most residential or commercial runs. The 23AWG solid bare copper conductors deliver consistent signal quality, and the WaterBlock fill keeps moisture out where it should not be. The jacket is sunlight-resistant LLDPE, so UV exposure is less of a worry over time. Inside, you will find four twisted pairs with a cross separator to keep crosstalk down, plus a ripcord to make stripping easier. It meets TIA-568-C.2 and UL444 standards and is RoHS compliant. Installation temps run from 0°C to 75°C, with operating temps down to -20°C. Whether you are connecting outbuildings, outdoor access points, or security cameras, this cable is built for underground and outdoor use.
$499.99
In stock 20 Products
If you're pulling cable through plenum spaces, this Cat6 Plenum Wavenet 6E04FPXX2N is the real deal. It's rated for air handling areas with CMP and FT6 designation, and the low smoke flame-retardant PVC jacket won't give off toxic fumes if things heat up. You get four 23AWG solid bare copper pairs wrapped in FEP insulation, which keeps signal integrity tight even when you're pushing higher bandwidth. The aluminum foil shield blocks electromagnetic interference, and the drain wire gives you a solid ground path. It handles frequencies up to 600MHz, so you've got room beyond standard gigabit. The reel gives you a full 1000 feet at a nominal 49 pounds. Installation temperature sits between zero and seventy-five degrees Celsius, with operation down to negative twenty. Wavenet built this to TIA-568-C.2 standards with ETL verification, and the ripcord makes stripping the jacket easier. Whether it's a school, hospital, or office retrofit, this cable checks the boxes for code compliance and performance.
$289.99 $299.99
In stock 30 Products
When you are running cable through plenum airspaces and need smooth payout from a large reel, this Wavenet Cat6 plenum cable on Reelex II is worth looking at. It comes as part number 6E04UPXX4N with a thousand feet of 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz. The CMP and FT6 listings cover you in drop ceilings and ducts, while TIA-568-C.2 verification and RoHS compliance check the performance boxes. Inside the jacket, FEP insulation handles heat better than standard polyethylene, a separator keeps pair geometry intact, and a ripcord makes stripping straightforward. The Reelex II spool pays out without tangling, which matters when pulling long distances or working with multiple reels. You also get nine jacket colors including black, green, orange, and yellow alongside standard options, so organizing circuits by color is easy. Whether wiring a data center, hospital, or multi-story office, this spool delivers code-compliant performance with less hassle.
$289.99 $299.99
In stock 30 Products
If you are pulling cable through a drop ceiling or air handling space where the fire inspector demands CMP-rated materials, this Wavenet Cat6 plenum cable on a RIB reel is built for exactly that. It ships as part number 6E04UPXX3N in a thousand-foot Reel-In-Box that pays out cleanly without the mess of loose coils. The cable uses 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get clean signal without grounding shields. It is CMP and FT6 listed for plenum spaces, TIA-568-C.2 verified, and RoHS compliant. Inside, FEP insulation handles higher temperatures than standard polyethylene, a separator keeps the pairs aligned, and a ripcord lets you strip the jacket without nicking conductors. The flame-retardant PVC outer shell is tested to maintain tensile strength after high-temperature aging. Available in blue, grey, red, purple, and white, this spool covers permanent Gigabit runs in commercial buildings, schools, and healthcare facilities where airspace safety matters.
$187.99 $199.99
In stock 30 Products
If you are running permanent Ethernet links between floors and want clean cable management, this Wavenet Cat6 riser cable on a RIB reel is worth considering. It ships as part number 6E04URXX3N in a thousand-foot Reel-in-Box that dispenses neatly without the tangles of traditional coils. The cable is built from 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get strong signal quality without shield grounding. It is CMR and FT4 listed for vertical shaft work, TIA-568-C.2 verified, and RoHS compliant. Inside the jacket, a separator keeps pair geometry consistent and a ripcord helps you strip back the sheath quickly. The flame-retardant PVC outer layer is tested to hold up after high-temperature aging, and eight jacket colors are available to keep circuits organized. Whether you are pulling drops for IP cameras, wireless access points, or standard Gigabit runs, this spool gives you code-compliant performance in a box that makes the pull easier.
$194.99 $199.99
In stock 30 Products
If you are pulling cable between floors in a commercial building or multi-unit residence, this Wavenet Cat6 riser cable gives you the bandwidth and code compliance you need without paying for plenum-grade materials you do not require. It is rated for 600MHz on an unshielded twisted pair design built around 23 AWG solid bare copper conductors, so signal quality stays strong and consistent across the full thousand-foot run. The CMR and FT4 certifications satisfy inspectors in vertical shafts, while the Reelex II packaging on part number 6E04URXX4N feeds smoothly and resists tangles during long pulls. A separator inside the jacket keeps pair geometry consistent, the ripcord makes stripping fast and clean, and the flame-retardant PVC outer shell is tested to retain tensile strength even after high-temperature aging. Whether you are wiring IP cameras, wireless access points, VoIP phones, or standard Gigabit drops, this TIA-568-C.2 verified, RoHS-compliant spool covers the distance without complicating your install.
