35 products

The Cat6A Plenum Wavenet 6A04FPBL2 is a 1000-foot reel of shielded solid bare copper Ethernet cable built for high-performance 10G networks running at frequencies up to 750MHz. It uses 23AWG conductors across four twisted pairs with an aluminum-foil shield wrapped around them, which helps block electromagnetic interference in electrically noisy environments like industrial floors or data centers. A cross-shaped separator sits between the pairs to keep crosstalk under control and maintain clean, stable signal paths over long runs. FEP insulation on each conductor handles heat well, while the flame-retardant PVC jacket carries a plenum CMP and FT6 rating, so you can run it safely through air-handling spaces like drop ceilings and raised floors. It is ETL and C(ETL)US certified to TIA-568-C.2 standards and fully RoHS compliant. The full 1000-foot box weighs 49 pounds and includes a ripcord for easier termination. You can get it in blue or white jacket colors, making cable identification simple across multiple network runs.

In stock 30 Products

$589.99 $598.99
The Cat6A Plenum Wavenet 6A04UPXX2 is a 1000-foot solid bare copper Ethernet cable built for 10-Gigabit networks running at up to 750MHz. It uses 23AWG conductors across four unshielded twisted pairs, separated by a cross-shaped divider that keeps crosstalk low and signal quality high. The plenum-rated (CMP/FT6) flame-retardant PVC jacket makes it safe for air-handling spaces like drop ceilings and raised floors, which is where most commercial runs end up anyway. FEP insulation on each conductor handles heat well and maintains strong dielectric performance. It's ETL and C(ETL)US certified to TIA-568-C.2 standards and fully RoHS compliant.
$509.99 $649.99

In stock 1 Products

The Berk-Tek LANmark-10G2 (part number 10137694) is a Cat6A plenum-rated UTP cable in green, built with 23 AWG solid bare copper conductors insulated in FEP and wrapped in a flame-retardant PVC jacket. What sets it apart is the factory performance guarantee — every reel passes testing with margins of 2 dB for NEXT/PSNEXT and 4 dB for ACRF/PSACRF beyond the Cat6A standard before it ships. It's characterized to 750 MHz, giving you 250 MHz of headroom over the minimum requirement, and supports everything from 10GBASE-T down to legacy 10BASE-T. The patented round design keeps the outer diameter at 0.300 inches while minimizing alien crosstalk, which makes a real difference in dense cable bundles. It comes on a 1000-foot reel, is ETL listed and RoHS compliant, and handles voice, video, and data simultaneously across converged networks. Made in the USA by Berk-Tek.

In stock 1 Products

$509.99 $649.99
$539.99 $684.99

In stock 8 Products

The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4).

In stock 8 Products

$539.99 $684.99
The Remee 6UB234UTP is a Category 6A augmented plenum Ethernet cable rated to 500 MHz — well above the standard Cat6A minimum — making it a dependable choice for 10 Gigabit network installations in commercial buildings, schools, hospitals, and data-heavy environments. It's built with 23 AWG solid bare copper conductors insulated in FEP, assembled around a central pair separator, and finished with a low-smoke, flame-retardant PVC jacket that carries a full CMP plenum rating and FT6 flame classification. The cable is C(ETL)US Listed, meaning its Category 6A performance has been independently verified — not just self-certified. Beyond standard Ethernet, it also supports ATM, RS-422, AES/EBU digital audio, and NTSC/PAL video applications. With a 40.8 lbf maximum pull tension and a 1.250-inch minimum bend radius, it's built to handle the physical demands of real cable pulls. Manufactured in the USA and clearly surface-printed for easy compliance verification on the job.
$549.99 $700.00

In stock 1 Products

The Belden DAUP is a Cat6A plenum-rated Ethernet cable built for real 10 Gigabit performance in commercial and enterprise environments. It uses 23 AWG solid bare copper conductors insulated with FEP, keeping signal loss low and electrical characteristics stable across long horizontal runs. The Flamarrest CMP-rated jacket meets NFPA 262 and UL 910 plenum fire standards, making it fully approved for use in air-handling ceiling spaces where fire codes are strict and non-negotiable. Belden's patented X-Spine® center member keeps all four pairs evenly spaced throughout the cable, while EquiBlock Barrier Technology cuts down alien crosstalk in dense, bundled cable runs. Full IEEE 802.3bt PoE++ support covers Type 1 through Type 4, so you can power IP cameras, wireless access points, and VoIP phones right through the cable. Each 1,000ft reel includes descending footage and meter markings printed on the jacket, making it easy to track exactly how much cable you've pulled on any job.

In stock 1 Products

$549.99 $700.00
The Prysmian GenSPEED 10 UTP Gen5 Cat6A Plenum Cable (Part No. 7151820) is a white, 1000ft spool of 23 AWG solid bare copper Ethernet cable built specifically for high-density indoor installations. At just 0.230 inches in diameter — the smallest in its class — it fits more cables into the same conduit space without sacrificing signal quality. It handles everything from standard Gigabit Ethernet to 10GBASE-T, and supports full PoE, PoE+, and PoE++ including 100W power over HDBaseT. The 105°C CMP plenum-rated jacket keeps things safe in air-handling spaces, even under heavy power loads. With a 1-inch minimum bend radius and UL-verified performance that exceeds TIA 568.2-D by +2 dB on PSANEXT, this cable is built to make installation faster and the network more reliable. TRU-Mark countdown footage markings are printed right on the jacket. Made in the USA and fully RoHS compliant.
The Berk‑Tek LANmark‑XTP Cat6A plenum Ethernet cable (1000 ft reel) delivers reliable 10 Gigabit performance in a slim, easy‑to‑install design. At just 0.275" outer diameter with 23 AWG bare copper conductors and FEP insulation, it reduces pathway congestion and improves airflow while the plenum‑rated jacket makes it safe for air‑handling spaces. Verified beyond standard Cat6 requirements, it supports long and short runs, has a low bend radius for neat installs, and handles power‑over‑Ethernet loads with minimal heat rise.
This Superior Essex Cat6A plenum cable features 23 AWG solid copper conductors with advanced FEP insulation, delivering reliable 10 Gigabit Ethernet performance up to 650 MHz bandwidth. The CMP-rated cable uses proprietary core wrap technology and maintains a compact 0.250-inch diameter, weighing 34 lbs per 1000 feet for efficient installation. With a guaranteed 15 dB alien crosstalk margin and 100-ohm impedance, this UL-verified cable supports PoE+ applications and exceeds ANSI/TIA-568.2-D standards.
$679.99 $799.99

In stock 1 Products

The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4). The CMP plenum rating and UL listing make it fully compliant for air-handling spaces. Manufactured in the USA, available in multiple colors, and backed by Leviton's product warranty.

In stock 1 Products

$679.99 $799.99
The Belden Cat6A Plenum 10GX53F Ethernet Cable is a high-performance, shielded (F/UTP) cable designed for 10GBASE-T Ethernet, Wi-Fi 6, PoE++, and other demanding applications. It features 23 AWG solid bare copper conductors, a 100% foil shield for EMI protection, and a plenum-rated Flamarrest® PVC-LS jacket for safe use in air-handling spaces. With a frequency of 625 MHz and support for high-speed data transmission, it ensures reliable performance in noisy environments. Ideal for horizontal cabling in commercial buildings, it complies with ANSI/TIA-568.2-D, IEEE 802.3bt, and NEC CMP standards.
The GenSPEED 7141819 Cat6A Plenum Solid Copper 1000ft UTP Blue Ethernet Cable is a high-performance network cable featuring 23 AWG solid bare copper conductors and an Encapsulated Isolation Wrap for superior ANEXT protection. It supports 10GBASE-T Ethernet, PoE, PoE+, and PoE++ applications and is plenum-rated with a low-smoke, flame-retardant PVC jacket, making it ideal for safe installation in commercial settings. With a compact design, improved bend radius, and UL-listed CMP-LP 0.6A certification.
The GenSPEED 7141851 Cat6A Plenum Solid Copper Ethernet Cable is a 1000ft UTP cable designed for high-performance networking, featuring 23 AWG solid bare annealed copper conductors. Its plenum-rated, low-smoke, flame-retardant PVC jacket meets strict fire safety standards, making it ideal for commercial installations. The cable uses Mosaic™ Variable Laser Cut Tape for superior Alien Crosstalk (ANEXT) and EMI protection and supports 10GBASE-T Ethernet, PoE, PoE+, and PoE++. Its compact design allows for easier installation with a bend radius of 1 inch, and it is UL Listed CMP-LP 0.7A for high-power PoE applications, with temperature ratings up to 105°C.
$699.99 $974.99

Contact for Availability

The Panduit Cat6A Plenum UTP Cable. This top-of-the-line cable has superior performance, exceeding Cat6A standards for blazing-fast 10 Gigabit Ethernet speeds. Advanced technology keeps your signal crystal clear, while the plenum-rated jacket ensures safety for in-ceiling installations. Whether you're managing a data center or building a secure government facility, the Panduit Cat6A Plenum UTP Cable offers the performance and reliability you can count on.

Contact for Availability

$699.99 $974.99
Cat6A Plenum GenSPEED (7131786) USA Made plenum-rated cable delivers blazing-fast 10GB & beyond. Individual pair shielding & foamed fluoropolymer insulation for max EMI protection & signal clarity. Up to 600MHz bandwidth. Get future-proof network performance today!

Cat6a Plenum Cables - Discounted Cables

When you need reliable, high-performance network infrastructure, Cat6a plenum cables from Discounted Cables deliver the speed, safety, and compliance your project demands. Our selection includes Cat6a plenum cable, Cat6a plenum shielded, and 1000ft options, all designed for installation in plenum spaces and available tax-free across the USA.

Why Choose Cat6a Plenum Cable?

Cat6a plenum cable stands out for its ability to support 10 Gigabit Ethernet over 100 meters, making it the preferred choice for modern networks. The plenum-rated (CMP) jacket meets the strictest fire safety standards, required by the National Electrical Code (NEC) for air handling spaces like those above ceilings or below raised floors. You get peace of mind knowing your installation meets code and protects building occupants.

Key Features:

  • 23 AWG solid bare copper conductors for maximum conductivity
  • Frequency rating up to 500 MHz (some models up to 750 MHz)
  • Supports 10GBASE-T and is backward compatible with lower speeds
  • Available in shielded (Cat6a shielded plenum cable) and unshielded versions
  • Plenum-rated jacket (CMP) for fire safety and low smoke emission

Bulk Cat6a Plenum and 1000ft Spools

For large-scale projects, you can order bulk Cat6a plenum in 1000ft spools. This format reduces waste and installation time, making it ideal for contractors, data centers, and commercial buildings. Our Cat6a plenum cable options, available in 1000ft lengths, ensure you have enough cable for long runs without splicing, maintaining signal integrity.

Shielded Cat6a Plenum Cable for Demanding Environments

If your installation faces high electromagnetic interference (EMI), select Cat6a plenum shielded cables. These Cat6a cables include an overall foil or braid shield, protecting your network from external noise and ensuring stable, high-speed data transmission. Cat6a shielded plenum cable is the go-to solution for hospitals, industrial sites, and areas with heavy electrical equipment.

Shopping cart

Your cart is empty.

Return to shop