BERK-TEK CAT6A Plenum Cables

The BERK-TEK RDT Cat 6A UTP CMP Cable (Part No. 11143780) comes in an orange jacket on a 1000ft reel, built specifically for installers who need both performance and practicality in a single package. At just 0.230 inches in diameter, it fits more cable runs into the same conduit space compared to standard Cat 6A cables, and the 0.92-inch minimum bend radius means tight corners aren't a problem anymore. It supports 10GBASE-T, PoE++ (Types 1–4), 802.11ac wireless, HD video, and IP security — basically anything a modern enterprise network demand. ETL-verified performance guarantees 8 dB of margin above Cat 6A requirements for alien crosstalk protection. No cross filler, Leviton FLX-1 technology, and Precision Twist Technology combine to keep pulls smooth and signal quality consistent across every foot of the run. The plenum CMP jacket is UL Listed at CMP-LP (0.7A) and rated to 105°C. Made in the USA and fully RoHS compliant.

The BERK-TEK RDT Cat 6A UTP CMP Cable in Blue (Part No. 11142454) is a 1000ft plenum-rated Ethernet cable built for demanding, high-density network installations. Its slim 0.230-inch outer diameter packs more cables into the same conduit space compared to standard Cat 6A options, without sacrificing signal quality. Built on 23 AWG bare copper with four twisted pairs, it comfortably handles 10GBASE-T speeds alongside 2.5G and 5G applications and fully supports PoE Types 1 through 4. Leviton's FLX-1 technology and the cross-filler-free design make it noticeably easier to bend, pull, and route — even through tight runs. ETL-verified performance exceeds the ANSI/TIA-568.2-D Category 6A standard, with an 8 dB margin on alien crosstalk measurements that gives you extra headroom in dense installations. The CMP fire rating covers it for plenum air spaces, and it ships in a TEKPAK Box for snag-free pulls. Made in the USA and RoHS compliant.

The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4).

The Berk-Tek LANmark-10G2 (part number 10137694) is a Cat6A plenum-rated UTP cable in green, built with 23 AWG solid bare copper conductors insulated in FEP and wrapped in a flame-retardant PVC jacket. What sets it apart is the factory performance guarantee — every reel passes testing with margins of 2 dB for NEXT/PSNEXT and 4 dB for ACRF/PSACRF beyond the Cat6A standard before it ships. It's characterized to 750 MHz, giving you 250 MHz of headroom over the minimum requirement, and supports everything from 10GBASE-T down to legacy 10BASE-T. The patented round design keeps the outer diameter at 0.300 inches while minimizing alien crosstalk, which makes a real difference in dense cable bundles. It comes on a 1000-foot reel, is ETL listed and RoHS compliant, and handles voice, video, and data simultaneously across converged networks. Made in the USA by Berk-Tek.

The Berk‑Tek LANmark‑XTP Cat6A plenum Ethernet cable (1000 ft reel) delivers reliable 10 Gigabit performance in a slim, easy‑to‑install design. At just 0.275" outer diameter with 23 AWG bare copper conductors and FEP insulation, it reduces pathway congestion and improves airflow while the plenum‑rated jacket makes it safe for air‑handling spaces. Verified beyond standard Cat6 requirements, it supports long and short runs, has a low bend radius for neat installs, and handles power‑over‑Ethernet loads with minimal heat rise.

The Berk-Tek RDT is a Cat6A plenum Ethernet cable with a reduced diameter of just 0.230" — noticeably slimmer than the typical 0.260" Cat6A cable — making it a smart pick for high-density commercial installations where conduit space and cable tray capacity are tight. It's built with 23 AWG bare copper conductors, no cross filler, and Berk-Tek's Precision Twist Technology to maintain consistent signal performance across the full cable length. The isolation wrap handles heat buildup in bundled PoE runs, and alien crosstalk performance exceeds Cat6A requirements by an 8 dB margin — independently verified by ETL as part of the Leviton Verified Performance Program. It supports 10GBASE-T, 2.5G/5G Ethernet, and full IEEE 802.3bt PoE++ (Types 1–4). The CMP plenum rating and UL listing make it fully compliant for air-handling spaces. Manufactured in the USA, available in multiple colors, and backed by Leviton's product warranty.