Contact for Availability
Contact for Availability
In stock 34 Products
Contact for Availability
Contact for Availability
In stock 34 Products
GenSpeed CAT6 plenum cables from General Cable give you a code-compliant Category 6 link for air handling spaces. Each cable ships in a 1000ft box, so you can run a full floor from a single length without splices. Discounted Cables delivers across the USA tax-free.
The GenSpeed 6 line is made in the USA, and a third party verifies its performance. You get these construction details:
● 23 AWG solid bare annealed copper conductors for stable permanent runs
● Fluoropolymer insulation under a low-smoke, flame-retardant PVC jacket
● A separator design that keeps electrical performance consistent
● TRU-Mark footage prints from 1000 ft to 0 ft, so you track cable used at a glance
● A rip cord under the jacket, so you strip the jacket cleanly
● Compliance with ANSI/TIA 568.2-D Category 6 requirements, with a 250 MHz rating
The National Electrical Code requires CMP-rated cable in plenum spaces, such as the area above a drop ceiling that carries return air. A plenum jacket resists flame spread, gives off less smoke, and meets the NFPA 262 test. Plenum cable also replaces riser (CMR) and general-purpose cable, so you can use one cable type throughout a site.
This cable fits offices, schools, hospitals, and retail sites. It supports:
● Gigabit Ethernet (1000BASE-T) and 100BASE-TX
● PoE devices, such as IP cameras, wireless access points and VoIP phones
● Digital video and building automation systems
Cat6 also carries 10GBASE-T up to 55 meters. If you need 10 Gig over a full 100-meter channel, choose Cat6A instead. If you want to compare other makes, browse our category 6 plenum cable collection.
● Type: 4-pair UTP, 100-ohm impedance
● Conductor: 23 AWG solid copper
● Diameter: About 0.2 in
● Operating temperature: -20°C to +75°C
● Installation temperature: 0°C to +60°C
● Minimum bend radius: 1 inch
● Colors: Blue, white, and black, by part number
Keep pulling tension below 32 lbs per cable, and do not bend it tighter than 1 inch. Terminate with jacks and plugs rated for solid conductors. Keep each channel within 100 meters.
Availability changes, so contact us before you plan a job. Pick your color by part number. Use one color per network, such as blue for data and white for security, so your technicians can trace each line quickly. Request a quote for large projects, and your delivery stays tax-free.
Wishlist is empty.