Belden 2412 Cat6 cable stands out as a Cat6+ solution, exceeding ANSI/TIA-568.2-D Category 6 requirements. While standard Cat6 guarantees 250 MHz, this cable is tested up to 350 MHz, giving your network extra bandwidth for demanding applications. You can confidently deploy it for Gigabit Ethernet, 10/100/1000BASE-T, and high-power PoE, PoE+, and PoE++ devices. IEEE 802.3bt certification ensures full support for modern networked devices, including IP cameras and wireless access points.
You need reliable, code-compliant cable for your infrastructure. Here’s what you get with Belden 2412 Cat6 riser cable:
● Cable Category: Cat6+ (exceeds TIA-568.2-D Cat6 standard)
● Conductor: 23 AWG solid bare copper, 4 pairs (8 conductors)
● Insulation: Polyolefin
● Jacket: PVC, CMR riser-rated (UL 1666)
● Shielding: Unshielded (U/UTP)
● Frequency: Guaranteed 250 MHz minimum; tested to 350 MHz
● Max Segment Length: 100 meters (328 ft)
● Certifications: UL 1666, ETL, ANSI/TIA-568.2-D, IEEE 802.3bt
● Ripcord: Yes, under the jacket for fast, clean removal
● Internal Separator: Dielectric tape for consistent pair geometry
● Operating Temperature: -20°C to +75°C
● Installation Temperature: 0°C to +50°C
● Length: 1000ft, reel-in-a-box format
● Color: Green (also available in grey)
● Country of Manufacture: USA
Belden 2412 Cat6 cable uses solid bare copper conductors, not copper-clad aluminum (CCA). Solid copper ensures lower attenuation, higher reliability, and full compliance with TIA and IEEE standards. CCA cables can fail performance tests and cause issues in longer runs or high-power PoE environments. With Belden Cat6 cable, you get consistent, professional-grade results.
The CMR riser rating allows you to install this cable vertically through walls, between floors, and in elevator shafts. It meets UL 1666 fire standards, so it resists flame spread in riser spaces. However, do not use this cable in plenum spaces (air-handling areas like drop ceilings or raised floors).
For those installations, select the Belden 2412 plenum variant, which features a CMP rating and a low-smoke, flame-retardant jacket. Plenum cable is more expensive but can be used in both plenum and riser spaces. The riser cable is for riser and general interior spaces only and is not rated for outdoor, direct burial, or underground use.
To achieve optimal performance, follow these guidelines:
● Use Cat6-rated RJ45 connectors, keystone jacks, and patch panels designed for 23 AWG solid copper.
● Do not exceed 25 lbs (11 kg) pull tension during installation.
● Maintain a minimum bend radius of 2.25 inches to protect the cable’s internal geometry.
● Use the built-in ripcord for clean jacket removal.
● This cable is compatible with the Belden IBDN 2400 System and standard structured cabling.
Discounted Cables ships Belden Cat6 cable tax-free across the USA. The 1000ft reel-in-a-box format simplifies handling and storage on job sites. Each reel is clearly labeled for easy verification before installation. You receive a genuine, USA-made Belden product at a competitive price, with no surprise tax charges at checkout.
No. The Belden 2412 riser cable is CMR-rated and not approved for plenum or air-handling spaces. For those areas, use the Belden 2412 plenum variant with a CMP rating and a low-smoke, flame-retardant jacket.
The maximum horizontal segment length is 100 meters (328 feet) per TIA standards. Exceeding this distance can cause signal degradation.
Belden 2412 uses solid bare copper conductors, which provide lower attenuation and better signal quality than CCA.
Yes. Belden 2412 is certified to IEEE 802.3bt, supporting PoE, PoE+, and PoE++ for high-power devices.
Use Cat6-rated RJ45 plugs, keystone jacks, and patch panels designed for 23 AWG solid copper conductors for the best results.
| Color | Green, Grey |
|---|---|
| Product Type | Ethernet networking cable |
| Condition | New |
| Brand | Belden |
| Package | Reel in a box |
| Category | 6+ |
| Spaces | Riser |
| Gauge | 23 AWG |
| Jacket | PVC |
| Insulation Material | PO - Polyolefin |
| Frequency | 350MHz to 550MHz |
| No. of Pairs | 4 Twisted |
| Shielding | Unshielded U/UTP |
| Conductor | Solid |
| Conductor Material | Bare Copper |
| Certification Standards | UL Certified, ETL, TIA Compliant |
What are your shipping rates?
We have a $14.99 - 19.99 Shipping rate. You can also check the shipping on the shopping cart page or the checkout. Shipping rates depend on the product you're buying and the location from where it will be shipping.
Free Shipping?
Yes, we do provide free shipping on bulk orders with no sales tax.
How long will it take to get my package?
The delivery depends on the location where you need it shipped to. We ship out the orders as soon as the order is placed and the payment is confirmed. Within our business hours.
When Do You Ship Orders?
Most orders are shipped the same day if placed Monday - Friday before 3:00 PM EST. Orders placed over the weekend will be shipped on the following Monday (excluding public & Federal holidays).
Do you accept Returns?
Please refer to the Refund Policy Page
Wishlist is empty.
