$259.99 $299.99
In stock 30 Products
CAT6 550MHz UTP Plenum cable delivers exceptional bandwidth capabilities that exceed standard CAT6 requirements. This 23 AWG solid copper cable features a no-spline design for easier installation while maintaining superior signal integrity. With its CMP/FT6 fire rating, it's perfect for commercial spaces where building codes require plenum-rated materials. The cable supports all your high-speed networking needs with impressive specs: 550MHz bandwidth, 47.3 dB NEXT at 100MHz, and 69% nominal velocity of propagation.
Cat6 Plenum Wavenet 6E04UPXX3N 600MHz UTP 23AWG 1000ft Solid Copper Ethernet Cable RIB (Reel-In-Box)
$259.99 $299.99
In stock 30 Products
Cat6 Plenum Wavenet 6E04UPXX3N 600MHz UTP 23AWG 1000ft Solid Copper Ethernet Cable RIB (Reel-In-Box)
If you are pulling cable through a drop ceiling or air handling space where the fire inspector demands CMP-rated materials, this Wavenet Cat6 plenum cable on a RIB reel is built for exactly that. It ships as part number 6E04UPXX3N in a thousand-foot Reel-In-Box that pays out cleanly without the mess of loose coils. The cable uses 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get clean signal without grounding shields. It is CMP and FT6 listed for plenum spaces, TIA-568-C.2 verified, and RoHS compliant. Inside, FEP insulation handles higher temperatures than standard polyethylene, a separator keeps the pairs aligned, and a ripcord lets you strip the jacket without nicking conductors. The flame-retardant PVC outer shell is tested to maintain tensile strength after high-temperature aging. Available in blue, grey, red, purple, and white, this spool covers permanent Gigabit runs in commercial buildings, schools, and healthcare facilities where airspace safety matters.
$259.99 $299.99
In stock 30 Products
When you are running cable through plenum airspaces and need smooth payout from a large reel, this Wavenet Cat6 plenum cable on Reelex II is worth looking at. It comes as part number 6E04UPXX4N with a thousand feet of 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz. The CMP and FT6 listings cover you in drop ceilings and ducts, while TIA-568-C.2 verification and RoHS compliance check the performance boxes. Inside the jacket, FEP insulation handles heat better than standard polyethylene, a separator keeps pair geometry intact, and a ripcord makes stripping straightforward. The Reelex II spool pays out without tangling, which matters when pulling long distances or working with multiple reels. You also get nine jacket colors including black, green, orange, and yellow alongside standard options, so organizing circuits by color is easy. Whether wiring a data center, hospital, or multi-story office, this spool delivers code-compliant performance with less hassle.
$189.99 $249.99
Contact for Availability
CAT6 Riser Belden 2412 Green Cable, delivering 4-pair UTP cables that go beyond ANSI/TIA/EIA-568-C.2 Category 6 standards. Perfect for the Belden IBDN 2400 System's horizontal cable, it guarantees a minimum of 250 MHz bandwidth, setting a new benchmark in data transmission. Bulk stock available.
$179.99 $199.99
Contact for Availability
Cat6 Riser CMR 1000ft Hitachi 30238-8 Ethernet Blue Cable is the perfect choice for reliable and secure data transmission. Its fast data transfer up to 555MHz ensures high-end performance along with secure data integrity, and UL-listed USA-made cable.
Contact for Availability
$179.99 $199.99
$137.99 $199.99
In stock 1 Products
CAT6 Riser Genesis White 1000ft Cable. 4 solid 23 AWG copper conductor pairs, CMR, this 1000ft. cable ensures reliable voice and data connectivity with a durable white jacket, sunlight resistance, and Category 6 performance.
$124.99 $179.99
In stock 20 Products
The Quabbin Datamax 2208 Cat6 Riser cable offers professional-grade networking performance with 24AWG stranded tinned copper conductors and 600MHz bandwidth capability. This UL-listed CMR-rated grey cable features four twisted pairs in a durable PVC jacket, supporting 10 Gigabit Ethernet and PoE applications up to 88 meters. Built to TIA-568.2-D Category 6 specifications, it delivers 100-ohm impedance with superior NEXT and return loss performance for reliable data transmission.
$169.99 $199.99
In stock 30 Products
The Wavenet 6E04URSPLSXX4N is a Cat6 riser cable that skips the central spline you find in most options, which makes it a lot easier to pull through conduits and terminate without fighting a rigid cross-member. It carries a CMR rating and FT4 flame classification, so it is fully approved for vertical riser shafts between floors in office buildings and retail spaces where plenum cable is not required. The cable uses 23 AWG solid bare copper conductors with HDPE insulation and a flame-retardant PVC jacket, keeping the outer diameter to about 0.205 inches. It is tested to 550 MHz and independently verified by ETL to ANSI/TIA-568-C.2, which means the performance is confirmed rather than just claimed. A ripcord sits under the jacket for quick stripping, and the 1000-foot Reelex II box keeps things manageable on the job site. It handles Gigabit Ethernet without issue and comes in nine colors, so you can color-code by floor or department if needed.
$169.99 $199.99
In stock 30 Products
If you're running network drops through vertical shafts or between floors, this Cat6 Riser Wavenet cable is built for that exact job. It handles up to 600MHz bandwidth across four solid bare copper pairs with HDPE insulation, giving you headroom for gigabit and beyond. The aluminum foil shield reduces electromagnetic interference, and the flame-retardant PVC jacket carries a CMR rating with FT4 certification, so it meets code for riser installations. You get a full 1000 feet on a reel, and the 23AWG solid conductors keep signal loss minimal over longer runs. Wavenet built this to TIA-568-C.2 standards with ETL verification, and the cable includes a ripcord and separator to make termination easier. Operating temperature spans from negative twenty up to seventy-five degrees Celsius, so it handles most building environments. Whether you're wiring an office building, school, or apartment complex, this is the cable you pull when you need shielded performance in a riser-rated jacket.
$169.99 $199.99
In stock 30 Products
If you are running permanent Ethernet links between floors and want clean cable management, this Wavenet Cat6 riser cable on a RIB reel is worth considering. It ships as part number 6E04URXX3N in a thousand-foot Reel-in-Box that dispenses neatly without the tangles of traditional coils. The cable is built from 23 AWG solid bare copper on an unshielded twisted pair design rated up to 600MHz, so you get strong signal quality without shield grounding. It is CMR and FT4 listed for vertical shaft work, TIA-568-C.2 verified, and RoHS compliant. Inside the jacket, a separator keeps pair geometry consistent and a ripcord helps you strip back the sheath quickly. The flame-retardant PVC outer layer is tested to hold up after high-temperature aging, and eight jacket colors are available to keep circuits organized. Whether you are pulling drops for IP cameras, wireless access points, or standard Gigabit runs, this spool gives you code-compliant performance in a box that makes the pull easier.
$169.99 $199.99
In stock 30 Products
If you are pulling cable between floors in a commercial building or multi-unit residence, this Wavenet Cat6 riser cable gives you the bandwidth and code compliance you need without paying for plenum-grade materials you do not require. It is rated for 600MHz on an unshielded twisted pair design built around 23 AWG solid bare copper conductors, so signal quality stays strong and consistent across the full thousand-foot run. The CMR and FT4 certifications satisfy inspectors in vertical shafts, while the Reelex II packaging on part number 6E04URXX4N feeds smoothly and resists tangles during long pulls. A separator inside the jacket keeps pair geometry consistent, the ripcord makes stripping fast and clean, and the flame-retardant PVC outer shell is tested to retain tensile strength even after high-temperature aging. Whether you are wiring IP cameras, wireless access points, VoIP phones, or standard Gigabit drops, this TIA-568-C.2 verified, RoHS-compliant spool covers the distance without complicating your install.
$16.99 $29.99
In stock 15 Products
Cat6 RJ45 Ends Connectors - ROHS compliant, ETL & UL validated. Enhance signal transmission with a transparent design. Ideal for diverse networks, supporting PoE standards. Invest confidently in top-tier networking connectors.
$159.99 $169.99
In stock 30 Products
Cat6 Solid Copper UTP 1000ft 23AWG Riser Rated Cable, a high-performance networking cable ideal for demanding applications such as Gigabit Ethernet, HDTV, and IP security. Crafted with solid copper conductors. It's CMR-rated, ensuring compliance with safety standards for riser applications
Cat6 panel - Standard 110 Type 24 port (568A/B Compatible) Compact rack-mountable 24 port Cat6 patch panel. Compact design provides you with 24 certified ports while allowing you to save on enclosure, rack, or wall space 19" Panel with color framed design.
Cat6 standard Panel 110 Type 48 port (568A/B Compatible) Compact rack-mountable 48 port Cat6 standard patch panel. Compact design provides you with 48 certified ports while allowing you to save on enclosure, rack, or wall space 19" Panel with color framed design distinguishes each different segment Universal wiring.
Cat6 UL Listed Keystone Jacks are versatile and meet EIA/TIA, UL-listed, and T568A/B standards and feature 110-type punch-down termination for quick setup. Choose our premium model with pure copper conductors for maximum signal clarity, These are housed in durable thermoplastic ABS and are compatible with standard faceplates, outlet boxes, and patch panels.
Experience Higher speed with Proterial CAT6 XS Plenum Rated UTP Cable. Crafted with the highest-grade components for superior durability and reliability, this UL-listed, TAA-compliant, USA-made cable delivers data transfer speeds of up to 555 MHz for gaming, streaming, and other bandwidth-intensive activities.
Cat6a keystone jacks punch down 45 degrees and provide a standard snap-in container for a wide range of low-voltage electrical jacks and optical connectors for use with a keystone wall plate face plate, surface-mount box, or patch panels. These keystone jacks will meet or surpass Cat6A standards.
$324.99 $449.99
In stock 30 Products
The Cat6A Outdoor Wavenet 6A04CMXBK2 is a 1000-foot reel of unshielded solid bare copper Ethernet cable built for outdoor network installs at 10G speeds up to 750MHz. It uses 23AWG conductors across four twisted pairs with an HDPE dielectric and a UV-rated PVC jacket that stands up to sun exposure without cracking or degrading over time. A cross-shaped separator runs between the pairs to keep crosstalk low and maintain signal integrity across the full run length. This cable carries the CMX outdoor rating, so it is specifically rated for exposed outdoor environments rather than just indoor conduit runs. It is ETL and C(ETL)US certified to TIA-568-C.2 standards and fully RoHS compliant. The black jacket keeps a low profile when strung along building exteriors or poles.
$11.73 – $24.09
In stock 160 Products
Get 10GBase-T data transfer with these high-quality Cat6A Ethernet black patch cables. Featuring pure copper conductors, 550MHz speed, 24AWG durable snagless boots, and multiple length and color options, they're perfect for a flawless network.
