Wavenet RG6URXX4-BC RG-6 60% Dual Shield Bare Copper CMR 18AWG 3.0GHz 1000ft Coaxial Cable

The Wavenet RG6URXX4-BC is a riser-rated (CMR) RG-6 coaxial cable featuring a solid bare copper center conductor — the preferred choice for installations where maximum electrical conductivity and the lowest resistive signal loss are priorities. Packaged in a 1,000 ft. Pullbox for smooth, controlled payout on the job site, this cable is sweep-verified to 3.0 GHz and independently verified to c(ETL)US standards. Whether you're running cable through walls, between floors, or across long horizontal spans in commercial or residential structures, the RG6URXX4-BC delivers the signal consistency and build quality that professional installers expect.

Product Specifications

Electrical Performance

The cable is sweep-verified to 3.0 GHz. Measured attenuation values (dB/100m) across the full frequency range are as follows:

Features and Applications

The defining feature of the RG6URXX4-BC is its solid bare copper center conductor — a material distinction that matters in applications where signal conductivity must be maximized and resistive loss kept to an absolute minimum over long runs. Paired with Foam PE dielectric insulation, this conductor supports a velocity of propagation of 84% and a capacitance of 15.5 pF/ft., keeping signal timing and loss tightly controlled from 5 MHz through 3.0 GHz.

The dual-shield system combines an aluminum foil layer with a 60% aluminum braid, working in tandem to reject electromagnetic interference and maintain clean signal integrity across the cable's entire frequency range. The FT4-rated CMR PVC jacket meets riser code requirements for vertical in-building runs, and sequential footage marking along the jacket makes length tracking straightforward during installation. The 1,000 ft. Pullbox format allows installers to pull cable directly from the box without a reel stand, reducing setup time on the job site.

Uses

The RG6URXX4-BC is engineered for demanding signal distribution environments across a variety of professional applications:

• CATV and broadband cable networks in multi-unit residential and commercial structures requiring riser-rated wiring
• Satellite (SAT) signal distribution across large or multi-floor buildings where bare copper conductivity is specified
• CCTV and video surveillance systems in commercial, institutional, and retail facilities
• In-building vertical riser runs where NEC CM and CMR/FT4 jacket ratings are required by local building codes
• Professional video and AV signal distribution systems demanding consistent 75 Ohm impedance across extended cable lengths

Construction

The cable is built from the inside out with a solid bare copper center conductor measuring 0.04 inches in diameter — bare copper's superior conductivity compared to copper clad steel makes it the preferred choice for runs where resistive loss is a critical design consideration. The conductor is surrounded by Foam PE insulation with a nominal thickness of 0.00728 inches and an outer diameter of 0.11858 inches, providing consistent dielectric performance along the cable's length. An aluminum braid shield with 60% coverage and a diameter of 0.213 inches forms the primary shielding layer, attenuating interference across the 3.0 GHz operating range. The outer PVC jacket carries a CMR riser rating (FT4) and a NEC CM designation, confirming compliance for vertical in-building installations under standard electrical codes. Each cable foot is individually marked for precise length tracking during pulls.

Additional Information

The RG6URXX4-BC is verified and listed to c(ETL)US standards and is compliant with SCTE IPS-SP-001, UL 1655, UL 13, UL 444, and RoHS requirements. The cable marking printed on the jacket reads: *RG6/U 18AWG BC DUAL CMR XXXXXX VERIFIED TO FT4 C(ETL)US CATV SWEPT TO 3.0 GHZ ***FT, providing full installation traceability directly on the cable. The product is available in both black (RG6URBK4-BC) and white (RG6URWH4-BC) jacket colors, both in the 1,000 ft. Pullbox configuration. Wavenet is headquartered at 707 E. Sepulveda Blvd., Carson, CA 90745.