Wavenet RG6QRXX4-BC RG-6 Quad Shield CMR 18AWG 3.0GHz Bare Cooper 1000ft Coaxial Cable

The Wavenet RG6QRXX4-BC is a professional-grade RG-6 quad shield coaxial cable built around a solid Bare Copper conductor — the premium conductor choice for CATV, satellite, and broadband distribution where low resistance and maximum signal fidelity matter most. Carrying a CMR riser rating and performance verified by a full sweep to 3.0 GHz, this 1,000-foot cable on a REELEX II spool is engineered to meet the demands of both commercial and residential signal infrastructure. Certified to SCTE IPS-SP-001 with c(ETL)US listing and full RoHS compliance, the RG6QRXX4-BC is a benchmark cable for installations where conductor quality is not a compromise.

Product Specifications

The RG6QRXX4-BC centers on a solid 18 AWG Bare Copper (BC) conductor with a diameter of 0.040 inches. Where Copper Clad Steel conductors carry a DC resistance of 35.9 Ω per 1,000 feet, the Bare Copper conductor in this cable delivers a substantially lower DC resistance of just 6.8 Ω per 1,000 feet at 20°C — a fivefold improvement that translates directly into reduced signal loss at the conductor level. Foam Polyethylene (Foam PE) dielectric insulation surrounds the conductor at a nominal thickness of 0.0728 inches and an insulation diameter of 0.1858 inches, supporting a velocity of propagation of 84% and a capacitance of 15.5 pF/ft. System impedance is 75 ohms (±3.0 Ohms). The aluminum braid shield has a coverage area of 60% and a braid diameter of 0.213 inches. The PVC outer jacket is nominally 0.0295 inches thick, yielding an overall cable diameter of 0.2716 inches. The 1,000-foot REELEX II spool weighs 36 lbs. The cable is rated for operating temperatures from -20°C to +60°C and is available in black or white jacket colors.

Measured attenuation across the full frequency spectrum: 2.66 dB/100m at 5 MHz, 5.25 dB/100m at 55 MHz, 10.10 dB/100m at 211 MHz, 11.02 dB/100m at 250 MHz, 11.48 dB/100m at 270 MHz, 12.14 dB/100m at 300 MHz, 13.15 dB/100m at 350 MHz, 14.11 dB/100m at 400 MHz, 15.03 dB/100m at 450 MHz, 15.88 dB/100m at 500 MHz, 16.70 dB/100m at 550 MHz, 17.52 dB/100m at 600 MHz, 19.69 dB/100m at 750 MHz, 21.33 dB/100m at 870 MHz, 22.97 dB/100m at 1,000 MHz, 25.00 dB/100m at 1,250 MHz, 26.37 dB/100m at 1,450 MHz, 31.16 dB/100m at 2,200 MHz, 32.83 dB/100m at 2,400 MHz, and 37.88 dB/100m at 3,000 MHz.

Features and Applications

The defining characteristic of the RG6QRXX4-BC is its solid Bare Copper center conductor. Pure copper conducts electrical signals more efficiently than steel-core alternatives, producing a conductor DC resistance of just 6.8 Ω/1000ft — a specification that matters on longer signal runs where conductor resistance accumulates. The quad-shield designation and aluminum braid shield deliver interference rejection suited to environments with elevated RF noise. Performance verified by a sweep to 3.0 GHz confirms compatibility with the full range of current digital cable, satellite, and DOCSIS frequency demands. The CMR riser rating and FT4 certification make the cable suitable for in-wall installation and vertical floor-to-floor routing under applicable building codes. The REELEX II spool format dispenses cable tangle-free, making it faster and cleaner to pull through conduit or open riser pathways. RoHS compliance confirms the cable meets environmental material restrictions for both domestic and international distribution.

Uses

The RG6QRXX4-BC is suited for CATV head-end distribution, satellite television drop runs, off-air antenna wiring, and broadband coaxial backbone infrastructure where conductor purity is a specified requirement. Its CMR riser rating makes it appropriate for vertical signal runs in commercial buildings, apartment complexes, hotels, schools, medical facilities, and multi-story residential structures. System designers and contractors specifying Bare Copper for franchise or utility-grade installations will find this cable meets the conductor and performance benchmarks those specifications demand. The 1,000-foot REELEX II spool is well matched to larger structured wiring projects, backbone segments, and any run where minimizing conductor resistance over distance is a priority. Available in black or white, it accommodates different job-site coding or aesthetic requirements.

Construction

The cable is built from the center outward with a solid 18 AWG Bare Copper conductor — a material choice that prioritizes conductivity and keeps DC resistance to 6.8 Ω per 1,000 feet. Foam PE dielectric wraps the conductor, minimizing dielectric loss and maintaining the 84% velocity of propagation necessary for stable signal timing. An aluminum braid shield at 60% coverage surrounds the dielectric, providing the interference barrier appropriate for quad-shield-rated coaxial cable. The PVC outer jacket completes the assembly, providing mechanical protection and the dimensional stability needed for consistent connector terminations. At a finished diameter of 0.2716 inches, the cable is compatible with standard RG-6 fittings and hardware. The 1,000-foot length is wound onto a REELEX II spool for tangle-free, controlled dispensing during installation.

Additional Information

Applicable standards include RG-6 Quad Shield Bare Copper CATV 75 Ω Coaxial Cable per the reference standard SCTE IPS-SP-001, with certifications to UL 1655, UL 13, UL 444, FT4, and RoHS. The cable is permanently marked: RG6/U QUAD SHIELD 18AWG BC CMR FT4 VERIFIED TO C(ETL)US CATV SWEPT TO 3.0 GHZ. The RG6QRXX4-BC is available exclusively in a 1,000-foot REELEX II spool configuration in black or white jacket colors. Wavenet has been manufacturing cable products since 1991 and is reachable toll-free at 888.492.8363 or at wavenetcable.com.